Pecky's Vauxhall Decoder

Page 1 of 2 1 2 LastLast
Results 1 to 10 of 13
  1. #1
    Member Nitrousvaux's Avatar
    Join Date
    Jul 2021
    Location
    Birmingham
    Posts
    25
    Vehicle
    Nova (with Zafira B Z20LER to be fitted)

    AC / Airbag / Tyre pressure monitor delete on Zafira B

    I am going to use the zafira canbus loom in a kit car and I need to omit the AC / tyre pressure monitoring and the airbags on the network to avoid the dash lights coming on.

    With the air bags, so far from my research, I need to find the right resistors for the system (any ideas) but the other two I am not sure what is the best way to isolate them.

    I have EEPROM reader and OPCOM and a little handy with the electronics.

    Thanks,


    • Advertising

      advertising
      Diagnostics.org.uk
      has no influence
      on advertisments
      that are displayed by
      Google Adsense

    • #2
      VIP+ soulman's Avatar
      Join Date
      Apr 2011
      Location
      Essex
      Posts
      1,367
      Vehicle
      Vectra
      tpms, you can disable the warning light from the instrument cluster itself, then take it off the low speed can

    • #3
      Member Nitrousvaux's Avatar
      Join Date
      Jul 2021
      Location
      Birmingham
      Posts
      25
      Vehicle
      Nova (with Zafira B Z20LER to be fitted)
      Quote Originally Posted by soulman View Post
      tpms, you can disable the warning light from the instrument cluster itself, then take it off the low speed can
      I may have to get you to explain a little bit more, when I am further ahead with the vehicle. I had the CD30 pass code but thats not the engine pass, so now trying to get the rear electrical centre out of the vehicle to read that eeprom then may be able to get into the system a bit more. Or can I do that above without the pass code?

      Cheers,

    • #4
      VIP+ soulman's Avatar
      Join Date
      Apr 2011
      Location
      Essex
      Posts
      1,367
      Vehicle
      Vectra
      need the code unfortunately

    • #5
      Member Nitrousvaux's Avatar
      Join Date
      Jul 2021
      Location
      Birmingham
      Posts
      25
      Vehicle
      Nova (with Zafira B Z20LER to be fitted)
      I am just a little nervous as after getting the eprom dump for the CD30, it no longer works!

    • #6
      Member Nitrousvaux's Avatar
      Join Date
      Jul 2021
      Location
      Birmingham
      Posts
      25
      Vehicle
      Nova (with Zafira B Z20LER to be fitted)
      Quote Originally Posted by soulman View Post
      need the code unfortunately
      Hi Soulman, I managed to read the rear electrical centre eeprom and now have the car pass. Tested it by clearing the ecu and nearly buggering things up!.

      Wondered if you could point me in the direction of how to do the above and remove it from the CAN? I was wondering, what else could be removed from the CAN before the engine ECU stops working?

      Thanks,
      Last edited by Nitrousvaux; 28th August 2021 at 02:29 PM. Reason: added question

    • #7
      VIP+ soulman's Avatar
      Join Date
      Apr 2011
      Location
      Essex
      Posts
      1,367
      Vehicle
      Vectra
      just go through the modules, look at Low Speed CAN settings, anywhere you see it set it to 'Not Present'

    • #8
      Member Nitrousvaux's Avatar
      Join Date
      Jul 2021
      Location
      Birmingham
      Posts
      25
      Vehicle
      Nova (with Zafira B Z20LER to be fitted)
      Quote Originally Posted by soulman View Post
      just go through the modules, look at Low Speed CAN settings, anywhere you see it set it to 'Not Present'
      Thanks Soulman will do. I am guessing this wont work with the Airbags? CIM etc? ABS I know I need for the speed signals, unless I can get a transducer to replicate the speed signal.

    • #9
      Member Nitrousvaux's Avatar
      Join Date
      Jul 2021
      Location
      Birmingham
      Posts
      25
      Vehicle
      Nova (with Zafira B Z20LER to be fitted)
      Tried that, still getting the symbol on the dash. Same for the air bags, disabled those too. I may, as dont need them, just de solder them on the clocks and live with it.

    • #10
      VIP+ soulman's Avatar
      Join Date
      Apr 2011
      Location
      Essex
      Posts
      1,367
      Vehicle
      Vectra
      have you turned off tpms in the variant config on the cluster?

      airbag lights issues you have to fix the problem, you cant turn them off

Page 1 of 2 1 2 LastLast

Similar Threads

  1. Replies: 3
    Last Post: 9th January 2016, 05:54 PM
  2. Tyre Pressure
    By holdensri100 in forum Corsa
    Replies: 2
    Last Post: 24th March 2014, 07:33 PM
  3. Vectra tyre pressure monitoring system
    By sarah1331 in forum Vectra
    Replies: 2
    Last Post: 14th March 2014, 03:33 PM

Visitors found this page by searching for:

Nobody landed on this page from a search engine, yet!

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
This site was created by Pecky to act as a knowledge base of useful information regarding Vauxhall cars.
Whilst I can help out with works, this isn't my full time job, so occasionally there may be a delay in replying.

Other forums

AON, VXR-Online, Insignia-drivers.uk

Diagnostics.org.uk is a trading name of RJP Projects Ltd which is a company registered in England and Wales with company number 7453778