And other question,
The second line of the eeprom must be all 0? the pekys decoder milleage correction dont says nothing for the second line.
or like the first image its fine?
Hi, i programmed a XK IPC (The IPC is in kilometers) but the IPC now IPC count the kilometers in miles instead of kilometers.
Por example, the partial of IPC shows 1.4 miles and the CID Display shows 2.3 KMs.
Are any way to change this in the IPC? i have tech2 and mdi2 (Tech2WIN)
Before programming the IPC the eeprom content is this (attached image)
(all 0 to program whit tech2 or mdi2)
Any ideas?
Thanks!
And other question,
The second line of the eeprom must be all 0? the pekys decoder milleage correction dont says nothing for the second line.
or like the first image its fine?
Mystery solved. The needle sweep change the IPC to miles. I wrote the original value in the eeprom to disable the needle sweep (20) and the Tech2 values are now in Kilometers instead of miles.
And now. any knows the value of the byte to enable OPC Scan in Kilometers? I know the value for Vauxhall, but not for Opel
Thanks
I found three eeprom dump from 13267550 UT Instrument Opel Astra H OPC and i think it maybe works. Now, i need check it. This is the next proof.
Solved
Now in kilometers.
Well, what value in the eeprom editor has to be changed to enable the needle sweep in kilometers?
[QUOTE=RoyReijn;56378]Well, what value in the eeprom editor has to be changed to enable the needle sweep in kilometers?[/QUOTE
see your mp inbox
Give me a shout with that as well please, would be interested to know
Diagnostics.org.uk is a trading name of RJP Projects Ltd which is a company registered in England and Wales with company number 7453778
Bookmarks