Try in here :@Mez
http://www.wmvx.club/forum/showthrea...e-a-fault-code
It started a few months ago, but only had only happened twice. After I'd been on a steady drive, say 20-30 miles at 60 in 5th, when I pulled up to a junction/roundabout the car would cut out or go into limp mode when I pulled off again.
But I've just been out and was just driving steady, about 20, and on the way back every time I pull off at a junction the car cuts out. The following codes came up;
Ecn 2680f
Ecn 2659f
Ecn 50074
Please help as I'm going out soon, hoping it settles after cars been off for a bit.
Thanks
Try in here :@Mez
http://www.wmvx.club/forum/showthrea...e-a-fault-code
Have a look above in red mateyIt started a few months ago, but only had only happened twice. After I'd been on a steady drive, say 20-30 miles at 60 in 5th, when I pulled up to a junction/roundabout the car would cut out or go into limp mode when I pulled off again.
But I've just been out and was just driving steady, about 20, and on the way back every time I pull off at a junction the car cuts out. The following codes came up;
Ecn 2680f
P0268 Cylinder 3 Injector Circuit High C-025
Ecn 2659f
P0265 Cylinder 2 Injector Circuit High C-024
Ecn 50074
P0500 Vehicle Speed Signal Range/Performance B-051
P0500 Vehicle Speed Sensor Circuit Incorrect Signal B-051
P0500 Vehicle Speed Signal Malfunction (CAN) B-051
P0500 Vehicle Speed Signal not plausible with Engine Speed and Injection Mass B-050
Please help as I'm going out soon, hoping it settles after cars been off for a bit.
Thanks
Turn the box down a setting and try it again
They (tuning boxes) are known to interfere and cause EML issues if they stray too far from the recommended settings.
I had a cheap box on mine its was great never had a prob just take the box off and see
Diagnostics.org.uk is a trading name of RJP Projects Ltd which is a company registered in England and Wales with company number 7453778
Bookmarks