Astra H Park Pilot retrofit

[domtorredo]

Me again. As it may be a problem of supply perhaps I should point out another possible discrepancy over the fitting instructions. With the supplied new loom was a single cable terminating in a fuse holder into which I had to insert two 5 amp fuses. The holder itself is fitted with a fuse blade and I had to insert it into Fuse Position 15 (FR15) in the REC. The point is there are no blade contacts in this fuse FR15 position - it is empty, not even as a 'spare' fuse position that could be brought into use. So, in terms of the fitting instructions what is the point of putting a fuse blade into a position that has no contacts and therefore no supply? Is it just a convenient 'parking' position for the holder with the two fuses or am I missing something!

Hi
Regarding fuse FR15 not all rec units has it available,with pin 30 it should be present (can be empty or already with green wire in it) don't remember if counting half block pins where 29 or 30 but you can compare your connector with my in photo from previous posts
While positive cable isn't connected you wont be able to program it