Astra H 05 1.6 TwinPort Cruise Control Wiring

[Lewis Greco]

Hi Pecky/All

I have been following threads here there and everywhere on this, Wondered if you can help me.
So I have purchased the Clutch switch & Stalk for my car, Fitted the stalk and went to fit clutch switch but No Wiring behind the Clocks...

I've checked out the connections at the X1 in the passenger footwell, confirmed that there is a grey cable connected in male pin 38 as stated in our pin out diag.
From what I can see the male is the Link to the UEC? Female being connections up into the dash (This doesn't have a connection with gray cable ETC...
So I wanted to confirm that this goes right back to the ECU, I followed a post by stampede who wrote that pin 27 of the bottom right loom will be the clutch switch... There is a cable connected here.

Anyway I'll get to the point, I'd appreciate input from anyone who can help...
I'm wondering If I should be OK to wire up the clutch switch to the X1 Passenger connector in the foot well? Would be great to be able to tap in here rather than bastardizing the loom to much...

Thanks in advance.

Lewis