Was hard to find 10.10.2007 version but found it.
If anyone needs it download link:
EDIT: LINK REMOVED
Extract archive and burn with nero at lowest speed i did it at 10x (tried with others no results) use good quality cd like verbatim
If something goes wrong dont worry later will post recovery procedure
Hope this will be useful for someone
Last edited by pecky; 5th January 2014 at 04:03 PM.
When I wanted to upgrade, I left my cd 70 brickwork.Was hard to find 10.10.2007 version but found it.
If anyone needs it download link:
EDIT: LINK REMOVED
Extract archive and burn with nero at lowest speed i did it at 10x (tried with others no results) use good quality cd like verbatim
If something goes wrong dont worry later will post recovery procedure
Hope this will be useful for someone
Not a good upgrade, I have not failed.
If someone has a good update, please provide the link to the download and try again to update the navi.
thanks
Last edited by pecky; 5th January 2014 at 04:04 PM.
Update is ok updated my without any problems, if burned to cd at lowest speed and on good quality cd like verbatim
Copy updates can easily crash the CD70, they are very particular about the CD media they are burned to.
They only cost between £5-£10 GBP from the main dealer.
Richard Peck
www.diagnostics.org.uk
Availability & bookings here
Insignia 2.0 Bi-Turbo 4x4. AFL, Sport Leather Pack, Embedded Bluetooth, DAB, Navi 900, Infinity Sound, 20" Alloys, VXR Styling pack, Dual Climate, TPMS, Power fold mirrors, electric rear windows, Sight & Light Pack, Front & Rear Parking Sensors
Tips before upgrade:
- Start update after a short trip so the battery has more charge
- Burn on quality brand CD (Verbatim works great) and lowest speed 4x-8x.
- Best to use Nero burner software. Avoid ImgBurn or CDBurnerXp or if use them then double check that image is burned with low speed and CD type=Mode2
- Better not to use laptop CD/DVD writer
- Order original Opel/Vauxhall update disc to avoid any problems as burning additional CDs in case of errors eventually will cost the same.
Update:
1. Insert ignition key/Switch CD70/DVD90 ON
2. Insert update CD. Follow prompts (Update takes about 15 minutes to complete)
3. Remove CD when update is finished
Recovery procedure:
In case update fails for any reason hangs it is possible to recover successfully, try reinserting the update CD and try the update process again.
Q:Cannot eject disc!
A: If disc can't be ejected then hold Eject button and turn on/off ignition. CD then should eject.
Q: How to restart failed update?
A: Remove Infotainment fuse or battery cable. Leave the CD inside. After it powers on it will show "software update" and start again. If it doesn't start then try update while ignition key is in but not turned to ACC. Burn additional CD and try with that or just order and use original update disc.
Q: How to rollback update (in case no progress indicator showed up)?
A: If unit recognizes software update CD but failed to reboot from the disc it has already set the 'flash update' flag and stays in the update mode even if update didn't actually start. In this case the lang cd can be used with a working loader that can restore the flash update flag to 'no' once it recognizes that there is no language loading required.
Q:To burn the image nero 10 burns the image in mode 2 and imgburn uses mode 1.Which mode is the correct?
A:You should burn a Nero (NRG) image with nero in order to preserve the Mode setting
Mode 2 is required for a successful burn
Is this the latest version??Was hard to find 10.10.2007 version but found it.
If anyone needs it download link:
EDIT: LINK REMOVED
Extract archive and burn with nero at lowest speed i did it at 10x (tried with others no results) use good quality cd like verbatim
If something goes wrong dont worry later will post recovery procedure
Hope this will be useful for someone
Last edited by pecky; 5th January 2014 at 04:04 PM.
I can confirm this works too
No latest is this version 20.06.2008 - http://www.diagnostics.org.uk/help/s...oftware-update
But latest version is more for show-off as it contains only a one bugfix - http://workshop-manuals.com/vauxhall...aker_function/
Diagnostics.org.uk is a trading name of RJP Projects Ltd which is a company registered in England and Wales with company number 7453778
Bookmarks