Can anyone explain how to wire up the pdc unit? Got sensors and loom and pdc unit but I'm now stuck on wiring it to the rec. Any help or diagrams would be much appreciated 👍
Can anyone explain how to wire up the pdc unit? Got sensors and loom and pdc unit but I'm now stuck on wiring it to the rec. Any help or diagrams would be much appreciated 👍
To rec if remember was only 2 wires and gnd to chassis all rest was sensors and buzzer
Will make a photo how it looks like to rec
Cheers pal that would be great had these parts for a while now and would good to get them in use
You wiring to rec should look like this
2 wires to rec and ground all rest sensors and buzzer
Will check which pin was for can bus wire
To be more clear
Loose white wire is can bus
And loose red positive
There is also black which is bolted to chassis
Ok that's brilliant. So does the pdc unit go pretty much where you want it to be? No specific place for it?
There is place for it, it clips on rec, if you look at rec than in right side there is place for it bit tricky to get hands in there
Pdc is where white sticker is
Now that does look like a tight squeeze! Just need to connect up and program also gonna do speedo and sport button. Is it easy enough to program?
Yep easy
Did you have compatible speedo?
Diagnostics.org.uk is a trading name of RJP Projects Ltd which is a company registered in England and Wales with company number 7453778
Bookmarks