Retro fitting CD70 and UHP etc

**Leegsi** · 27th March 2018, 08:42 PM

Just bought a complete a complete setup from another Astra Twintop to go into our twintop.

Am I missing anything (Apart from a custom loom for the bluetooth module and the stereo as I am in the middle of doing an led change) and where does it all go?

Click image for larger version.

Name: Twintop CD70 Stuff.jpg
Views: 14
Size: 99.4 KB
ID: 2208

**Gav** · 27th March 2018, 09:33 PM

As you said loom and stereo missing, thats it

Gav

**Bolter99** · 27th March 2018, 09:36 PM

You also need a GPS antenna right?

Is there a part number on the bracket for the bluetooth module? Im missing one.

**Leegsi** · 28th March 2018, 06:38 AM

The square metal bracket has what looks like a gps sensor on it?

The UHP bracket has 13 188 850 on it.

Where does the square (gps?) bracket and uhp bracket bolt too and will the mic loom be there or is that another part that needs to be added (Car is a 2006 Astra twintop design)

**Gav** · 28th March 2018, 09:19 AM

Originally Posted by Bolter99

You also need a GPS antenna right?

Is there a part number on the bracket for the bluetooth module? Im missing one.

Cable tie it to the bar behind the dash. lol

Originally Posted by Leegsi

The square metal bracket has what looks like a gps sensor on it?

The UHP bracket has 13 188 850 on it.

Where does the square (gps?) bracket and uhp bracket bolt too and will the mic loom be there or is that another part that needs to be added (Car is a 2006 Astra twintop design)

You can get an aftermarket GPS aerial from ebay, rather than running a new aerial to the roof.

Gav

**Leegsi** · 28th March 2018, 08:06 PM

Yeah I have an eBay sensor ready to fit but thought I would use the original if it was easy enough.

Need to sort out where to get a custom loom now and start fitting it.

**Bolter99** · 28th March 2018, 09:30 PM

If you was to make your own; You can obtain the plug for the bluetooth from VW/Audi (not sure of the part number - you'll also need a half decent crimper to suit), the rest can be made using a Quadlock to Quadlock extension and some wire.

**Bolter99** · 28th March 2018, 10:04 PM

VW 1J0972977C for the plug.

**Leegsi** · 6th April 2018, 05:45 PM

Fitted the Mic into the interior light and plugged into the connector holder (Arrowed are the 2 wires that go to the Mic connector).

The position it plugged into has a wired connector in it (2 pins wired). Where does this part of the loom go to?