Pecky's Vauxhall Decoder

Results 1 to 5 of 5
  1. #1
    Member corsaedt's Avatar
    Join Date
    Nov 2013
    Location
    Turkey
    Posts
    155
    Vehicle
    Corsa Color edition 1.3 z13dtj

    Auto lock is not working after retrofit DDS and HSA..

    Hello
    I did hsa and dds retrofit normally i never found hsa and dds supported a car upward 2011 as you know opel changed the abs socket after 2009 and i could not find abs ecu which supported hsa and dds on z13dtj. i bought a new old socket abs ecu. A friend help me about VIN for sps programming so only thing how to do converter between old abs ecu socket and new abs ecu socket. i made it within 1 day..so it worked very well no DTC.. but i got new problem central auto lock is not working regular but it s strange auto central lock is working sometimes or not so i can work it manually from switch button as you know auto lock function is activating after 10 km/h...even stop engine and restart it s not working...
    what i have done maybe you can give me an idea about issue...
    what i have done and what happening:
    1) ABS ecu socket is not compatible with my car that s why i had to make a converter between old abs socket and new abs socket..
    2) after replace old ecu with my converter tool , i didn t realize but it was working central lock and ignition 1 radio problem.. maybe i remember wrong
    3) i changed the hazard switch because of dds button maybe i thought problems is hazard switch and i changed it with old one but no luck it s same problem it was not working..
    4) i thought maybe problem is BCM i replaced the old one but auto door lock system did not work on old bcm but i noticed one thing when you remove battery or bcm it s working until to remove key but when you remove the key from ignition it s not working..
    5) Last chance i will replaced abs ecu with old one i think problem is the new abs ecu..
    6) i need to do sps programming to abs ecu for new software...
    7) t&c is turning off when you stop the engine normally it was open until to remove key from ignition...
    My question:
    1) where does the central door locking system get the signal?
    2) I did not check the cables but when i press the lock switch manually it works that s why i don t think it s about loom

    i don t have any DTC it s clear but i have these problems What do you think about that ??

    Click image for larger version. 

Name:	ea2696f012971e81971a7abc02917e7b.jpg 
Views:	2 
Size:	57.5 KB 
ID:	2193
    Click image for larger version. 

Name:	fcaecb638ba64924d5e7e7a7ab016d34.jpg 
Views:	2 
Size:	40.6 KB 
ID:	2194
    Click image for larger version. 

Name:	33d65096c700875ce0e8755a11b34d6a.jpg 
Views:	2 
Size:	37.1 KB 
ID:	2195
    Click image for larger version. 

Name:	415c379434bb268e9ba0947f971fbe8c.jpg 
Views:	2 
Size:	41.3 KB 
ID:	2196
    Click image for larger version. 

Name:	9cddb7f859cfa3212024fa98d778d0d2.jpg 
Views:	2 
Size:	44.8 KB 
ID:	2197


    • Advertising

      advertising
      Diagnostics.org.uk
      has no influence
      on advertisments
      that are displayed by
      Google Adsense

    • #2
      VIP domtorredo's Avatar
      Join Date
      Jan 2012
      Location
      Hull, East Yorkshire
      Posts
      1,587
      Vehicle
      Peugeot Expert
      Seems like a bcm is not getting speed signal

      Sent from my F3111 using Tapatalk

    • #3
      Member corsaedt's Avatar
      Join Date
      Nov 2013
      Location
      Turkey
      Posts
      155
      Vehicle
      Corsa Color edition 1.3 z13dtj
      where does bcm get the speed signal? bcm is fine because i replaced old one it didn t work also on old bcm..yesterday it worked any time like new but when i removed the key from ignition it does not work anymore..i will replace old ecu if it s work i will change the can bus loom because can bus looms are 0,5-0,75 around maybe problem is?


      Sent from my iPhone using Tapatalk

    • #4
      VIP domtorredo's Avatar
      Join Date
      Jan 2012
      Location
      Hull, East Yorkshire
      Posts
      1,587
      Vehicle
      Peugeot Expert
      Speed usually is calculated from abs/speed sensor in front wheel hub
      So if it goes to abs ecu look for bad solder joint in your adapter.
      But check wiring first where them cables goes

      Sent from my F3111 using Tapatalk

    • #5
      Member corsaedt's Avatar
      Join Date
      Nov 2013
      Location
      Turkey
      Posts
      155
      Vehicle
      Corsa Color edition 1.3 z13dtj
      i will replace old one if it work very well i will understand problem is abs ecu loom or incompatible with my car so i will do sps if it does not work i will drive like that..


      Sent from my iPhone using Tapatalk

Similar Threads

  1. Retrofit auto dimming mirror and rain sensor
    By zdravko.primorac in forum Astra
    Replies: 19
    Last Post: 21st February 2022, 09:59 PM
  2. Meriva B, DDS then TPMS.. wiring
    By gazz292 in forum Electrical
    Replies: 0
    Last Post: 15th April 2018, 06:05 PM
  3. Auto lock is not working.
    By corsaedt in forum Corsa
    Replies: 0
    Last Post: 20th February 2018, 02:30 PM

Visitors found this page by searching for:

Nobody landed on this page from a search engine, yet!

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
This site was created by Pecky to act as a knowledge base of useful information regarding Vauxhall cars.
Whilst I can help out with works, this isn't my full time job, so occasionally there may be a delay in replying.

Other forums

AON, VXR-Online, Insignia-drivers.uk

Diagnostics.org.uk is a trading name of RJP Projects Ltd which is a company registered in England and Wales with company number 7453778