Pecky's Vauxhall Decoder

Results 1 to 7 of 7
  1. #1
    Member spacejam's Avatar
    Join Date
    Jan 2012
    Location
    Netherlands
    Posts
    11
    Vehicle
    N/A

    Decoding gid/cd30 with op-com, adding uhp

    I am reading a lot about decoing the cd30mp3 with GID display on this forum and I'm hoping someone can help me. I can't ready anywhere how to read the eeprom from a cd30mp3, is this possible with the op-com? (I have the orignal opcom and a china-clone op-com). I want to buy an married cd30 with gid but also want to add an UHP I already have.

    I have the following situation:
    An UHP4 which isn't divorced properly from my previous car, I didn't know is was also part of the security system as I didn't see an anti-theft option in the variant config like the cd-30 and gid display, but I do have the security code of the previous car.

    It is still possible to divorce it when I have the security code? I was thinking this would maybe work:

    - Divorse cd30 from the gid with the security code which can be get from the eeprom
    - Marrie cd30 with gid with the security code from the old car
    - add and program the uhp.

    Could this be an option?

    (sorry for the bad english, I'm dutch )


    • Advertising

      advertising
      Diagnostics.org.uk
      has no influence
      on advertisments
      that are displayed by
      Google Adsense

    • #2
      Member n0tiert's Avatar
      Join Date
      Aug 2016
      Location
      Frankfurt
      Posts
      129
      Vehicle
      Astra H
      Hi,

      you could try to Factory Reset the GID and the CD30MP3, Program it with the code from the previous Car (UHP), then Factory Reset all (GID, Radio, UHP) and reprogram with new code
      else you need someone with a Tech2 to SPS your UHP4 (resets it)

      I´m aware that op-com can program UHP, atleast not the pirate version....

      Rgds,

      n0tiert
      Astra H Caravan Z14XEP 18" OPC Line Rims
      https://www.astra-h-forum.de/t/mein-roter-rebell.122867/#post-3363845 My Mods

    • #3
      Member spacejam's Avatar
      Join Date
      Jan 2012
      Location
      Netherlands
      Posts
      11
      Vehicle
      N/A
      Quote Originally Posted by n0tiert View Post
      Hi,

      you could try to Factory Reset the GID and the CD30MP3, Program it with the code from the previous Car (UHP), then Factory Reset all (GID, Radio, UHP) and reprogram with new code
      else you need someone with a Tech2 to SPS your UHP4 (resets it)

      I´m aware that op-com can program UHP, atleast not the pirate version....

      Rgds,

      n0tiert
      The op-com doesn't support a factory reset, so I was hoping I could also read the eeprom with the (original) op-com as I don't know how to read the eeprom with a eeprom programmer. Is there maybe an how-to or something available how to do this with an cd-30, I do know where the epprom is located but don't know how to read it and how the software can be used.

    • #4
      Member n0tiert's Avatar
      Join Date
      Aug 2016
      Location
      Frankfurt
      Posts
      129
      Vehicle
      Astra H
      atleast you need an programmer, SOIC8 Clip to dump the eeprom Information, software to read eeproms usually comes with programmer,
      i´m in Zandvoort 1 week from tomorrow on so if you are nearby.....
      Astra H Caravan Z14XEP 18" OPC Line Rims
      https://www.astra-h-forum.de/t/mein-roter-rebell.122867/#post-3363845 My Mods

    • #5
      VIP domtorredo's Avatar
      Join Date
      Jan 2012
      Location
      Hull, East Yorkshire
      Posts
      1,587
      Vehicle
      Peugeot Expert
      Uhp doesn't have eeprom and opcom as far as i have found doesnt program them at all

      Sent from my F3111 using Tapatalk

    • #6
      Member spacejam's Avatar
      Join Date
      Jan 2012
      Location
      Netherlands
      Posts
      11
      Vehicle
      N/A
      Thanks for the information. I also need to read 2 radio's with an eeprom programmer so I don't want to buy an expensive eeprom programmer. Can I also do it with something like this:

      https://www.amazon.de/WINGONEER-Vors...rom+programmer

      togeter with a Soic8 clip?

    • #7
      VIP domtorredo's Avatar
      Join Date
      Jan 2012
      Location
      Hull, East Yorkshire
      Posts
      1,587
      Vehicle
      Peugeot Expert
      Quote Originally Posted by spacejam View Post
      Thanks for the information. I also need to read 2 radio's with an eeprom programmer so I don't want to buy an expensive eeprom programmer. Can I also do it with something like this:

      https://www.amazon.de/WINGONEER-Vors...rom+programmer

      togeter with a Soic8 clip?
      Should do a job
      I would avoid using clip but give it a go
      For uhp you need someone woth tech2 or mdi and do sps
      And don't fit or set uhp as present in ehu or screen settings before you have paired them

      Sent from my F3111 using Tapatalk

Similar Threads

  1. Opel CD30 MP3 (Delphi) + GID correct dump needed
    By mercenary in forum Decoding
    Replies: 3
    Last Post: 26th January 2019, 12:09 AM
  2. CD30 MP3 Grundig Decoding (need help!)
    By FPS in forum Decoding
    Replies: 31
    Last Post: 4th October 2014, 03:25 PM

Visitors found this page by searching for:

program gid opcom

Leer eeprom cd30 opcom

vauxhall cd30 change eeprom

https:diagnostics.org.ukshowthread.php7494-Decoding-gid-cd30-with-op-com-adding-uhp

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
This site was created by Pecky to act as a knowledge base of useful information regarding Vauxhall cars.
Whilst I can help out with works, this isn't my full time job, so occasionally there may be a delay in replying.

Other forums

AON, VXR-Online, Insignia-drivers.uk

Diagnostics.org.uk is a trading name of RJP Projects Ltd which is a company registered in England and Wales with company number 7453778