Anybody has done this?
Hello everybody.
I would like to retrofit only DDS fonction on my ipc instrument.
Retrofitting all TPMS cost a lot.
I have the correct ABS pump and my car is already equipped with ESP .
I have retrofit 6 buttons console with the DDS button.
With Opcom i activate in IPc variants configurations "Dds enable"
When ignition is on in my ipc instrument i have the dds light check on for 2 sec.It seems to be correctly activated on my ipc.But when i put on the button dds to reset system in my ipc the dds light dont flash as it must to do.
So my question is what else i have to activate so dds system works correctly?
Anybody has done this?
You need to check the canbus networks as well as it needs to be set present across all modules on that network.
It is on Low Speed Canbus I recall.
Richard Peck
www.diagnostics.org.uk
Availability & bookings here
Insignia 2.0 Bi-Turbo 4x4. AFL, Sport Leather Pack, Embedded Bluetooth, DAB, Navi 900, Infinity Sound, 20" Alloys, VXR Styling pack, Dual Climate, TPMS, Power fold mirrors, electric rear windows, Sight & Light Pack, Front & Rear Parking Sensors
Witch canbus and witch modules?How can i enter on canbus network ?
Ok anderstand. I think you mean "Program low speed can bus configuration "
But witch modules?All?
I already have done ipc module.
On Abs there is nothing to do with opcom.There is only high speed and program variant configuration change only variant coding.
Do you think with tech2 is possible?
My DDS doesn't seem to work lol I do the usual hold the button down after tyre pressures have been done but never seen it ac I ate.
Came on my car as standard
I have try with opcom on abs module but it has not this option.I have buy a tech2 china clone to do this but tech2 not connect to the vehicule via candi module.Chinesse shit.I m trying to solve this issue connection with tech2
Diagnostics.org.uk is a trading name of RJP Projects Ltd which is a company registered in England and Wales with company number 7453778
Bookmarks