DDS retrofit

[nicos]

Hello everybody.
I would like to retrofit only DDS fonction on my ipc instrument.
Retrofitting all TPMS cost a lot.
I have the correct ABS pump and my car is already equipped with ESP .
I have retrofit 6 buttons console with the DDS button.
With Opcom i activate in IPc variants configurations "Dds enable"
When ignition is on in my ipc instrument i have the dds light check on for 2 sec.It seems to be correctly activated on my ipc.But when i put on the button dds to reset system in my ipc the dds light dont flash as it must to do.
So my question is what else i have to activate so dds system works correctly?

[nicos]

Anybody has done this?

[pecky]

You need to check the canbus networks as well as it needs to be set present across all modules on that network.

It is on Low Speed Canbus I recall.

[nicos]

Witch canbus and witch modules?How can i enter on canbus network ?

[nicos]

Ok anderstand. I think you mean "Program low speed can bus configuration "
But witch modules?All?
I already have done ipc module.
On Abs there is nothing to do with opcom.There is only high speed and program variant configuration change only variant coding.

[n0tiert]

check the ABS you need to add DDS there, also check if wire from Hazard to IPC is present

Hazard Switch -> IPC
Black-Brown #4 -> Black-Brown #39

[nicos]

Do you think with tech2 is possible?

[flexeh]

My DDS doesn't seem to work lol I do the usual hold the button down after tyre pressures have been done but never seen it ac I ate.
Came on my car as standard

[nicos]

I have try with opcom on abs module but it has not this option.I have buy a tech2 china clone to do this but tech2 not connect to the vehicule via candi module.Chinesse shit.I m trying to solve this issue connection with tech2

[n0tiert]

What type of ABS you got ?
some doesn´t have the feature


(Source: astra-h-forum.de)

check here, i´ve retrofitted mine few weeks ago

ABS Type: BR / YAW RATE Sensor: BA