Help. CD30 to CD70 conversion

[alnmoore]

Hello

i was hoping somebody could help me: I have an Astra H 1.7 cdti 2006

I want to upgrade form my CD30 with a GID (Blue) display which Pecky kindly fitted for me years ago. I have just bought a CD70 and CID (24461297 QN) for a Vectra C 1.9 2004 from ebay. They are married and work but when I come to use OP-COM to change the fuel etc the software doesn't communicate with the units. Can any body help or have I wasted my money by not doing the proper research?

Regards

[soulman]

refit the cd30 and gid, does it communicate then? if no you have an issue with opcom... if it works refit the cd70 or gid (one at a time) and try to communicate.. There is no reason why it should not communicate with the new radio and screen

[Gav]

The vectra cid is different to the astra h one, the size is different plus the firmware



Gav

[alnmoore]

Thanks I have managed to get to fit. Just not able to communicate to change with op-com. As you say the firmware may be different.


Sent from my iPhone using Tapatalk

[soulman]

the radio is definitely the same and should communicate and so should the display as I fit them to the test rig on the workbench without any issues.. Ive also pulled out a radio and display from an Astra and fitted on the bench without any issue (set up for a vectra)

[soulman]

Thanks I have managed to get to fit. Just not able to communicate to change with op-com. As you say the firmware may be different.


Sent from my iPhone using Tapatalk

You will encounter issues with fuel / range / and also engine temp as well

[alnmoore]

Thanks I have issues with fuel but never had engine temp.


Sent from my iPhone using Tapatalk