CID issue after firmware upgrade

[soulman]

As above, the screen comes on anyway when you turn on the ignition... The logic settings are there so it can set whether the radio itself comes on with the ignition or not

[AntVXR]

Hi,

Well that is not an issue anymore as I have made my own ignition line.

I do have another problem though, when I sent the screen in I was told it would be programmed for the newer type fuel level sender (my car is 2008)
I ran my fuel right down today but the range was still showing 150 miles - Is there anything I need to do to set this so it reads correctly please?

Tanks again, Ant.