Fitting cruise control

[gc1967]

I have a vauxhall combo van 1.3 cdti and on opcom it's classed as a corsa c
I have checked with opcom and clutch and 2 brake switches work.
I have obviously got to find a corsa c cruise control stalk and run a wire from stalk to the bcm
Does anyone know what wire and connectors I need and once wire is fitted and activated with opcom will it just be the matter of pushing button on replacement stalk for cruise control to kick in
If anyone has a how to showing how to fit the wire it would be much appreciated
Many thanks in advance

[gc1967]

Anyone please

[n0tiert]

@BCM use pin 2


*taken from Corsa !

may you need to add another wire to engine ecu connector

[gc1967]

How will I know if I need to add another wire to the engine ecu connector
Thanks

[n0tiert]

If its less MJ04

[gc1967]

If its less MJ04

Sorry haven't a clue what you mean

[sulten]

Sorry haven't a clue what you mean

MJ04=Model Jahre 2004 or MY04=Model year 2004. So if your 10th digit in WIN is 3 or less you will need to add another wire.

[gc1967]

MJ04=Model Jahre 2004 or MY04=Model year 2004. So if your 10th digit in WIN is 3 or less you will need to add another wire.

My vauxhall combo van is a 1.3 year 2008
On opcom comes up as a Vauxhall Corsa c

[n0tiert]

Then you will good to go.....

[gc1967]

Do you happen to know what wire to use and what connectors on each end for wire from cc stalk to bcm