Cruise Control Combo combo 2008 ?

[gc1967]

On my combo 2008 I have checked with opcom and pressed brake and the 2 brake switches say active and press clutch switch that's says active does that mean if I change stalk to cruise control I can have cruise control - obviously there has to be a wire there to BCM fingers crossed if not one would have to be fitted
If it can be done and is it hard and a lot of hassle

[Gav]

Yes you can install CC as i have it on my Combo.
You will need to add a wire from the stalk PIN 4
to the BCM PIN 2.

Then activation via variant programming.


Gav

[gc1967]

Yes you can install CC as i have it on my Combo.
You will need to add a wire from the stalk PIN 4
to the BCM PIN 2.

Then activation via variant programming.


Gav

Is there any chance the wire might be already there and if it's not how hard is it to get it from stalk to BCM and what sort of wire and connectors for the end do you use
When did you find a cruise control stalk for your combo - Mines a 1.3 cdti - year 2008 - or can you just get a corsa c stalk
Many thanks for your help

[Gav]

I know for a fact the wire will not be there.
I have a high spec Combo. AC, electric windows, heated and electric mirrors, cd70 and GID. xenon headlights
All standard from factory.

I installed CC to put the spec even higher, just awaiting on some heated leather seats and il be a happy buddy.

Its one wire that feeds behind the dash to the BCM hole behind the glovebox.
Yes a Corsa C CC stalk is correct, no other stalk will fit, as they have different patterned plugs.


Hope this helps


Gav

[gc1967]

I know for a fact the wire will not be there.
I have a high spec Combo. AC, electric windows, heated and electric mirrors, cd70 and GID. xenon headlights
All standard from factory.

I installed CC to put the spec even higher, just awaiting on some heated leather seats and il be a happy buddy.

Its one wire that feeds behind the dash to the BCM hole behind the glovebox.
Yes a Corsa C CC stalk is correct, no other stalk will fit, as they have different patterned plugs.


Hope this helps


Gav

What wire do I need to get and what connectors do I need for each end of the wire ?
Where's the best place to get a used corsa c cruise control stalk ?
Is it easy to fit the stalk and the wire from stalk to the BCM ?
Thanks for your help

[Gav]

I can supply the wire and terminals needed!

As for the stalk. That's a 3 second job lol.
You are better of getting one from eBay.

[gc1967]

I can supply the wire and terminals needed!

As for the stalk. That's a 3 second job lol.
You are better of getting one from eBay.

How can I be certain my van can use it using opcom , I know there is a clutch switch above clutch pedal?
I have looked and looked on eBay for cc stalk but couldn't see anything
If have read getting the wire from stalk to bcm unit is a nightmare
Once installed and activated with opcom is there a light on dashboard to show you are using cc
Sorry for all the questions - total noob
Thanks

[gc1967]

I can supply the wire and terminals needed!

As for the stalk. That's a 3 second job lol.
You are better of getting one from eBay.

Gav could you tell me how much you want for the wire and connectors so I can get them ordered
Also you said you have a how too could you forward it to me please

[Gav]

They are rare to find.
Not really i do have a how2 for installing the loom and to program the cruise control.
As for the tell tale light sadly not compatible on any clocks

[gc1967]

They are rare to find.
Not really i do have a how2 for installing the loom and to program the cruise control.
As for the tell tale light sadly not compatible on any clocks

Could you tell me where about a in opcom you look to make sure clutch switch works and 2 brake switches work as I have forgot.
Looked for a corsa c cc stalk but no luck yet
Many thanks for your help