Yes you can install CC as i have it on my Combo.
You will need to add a wire from the stalk PIN 4
to the BCM PIN 2.
Then activation via variant programming.
Gav
On my combo 2008 I have checked with opcom and pressed brake and the 2 brake switches say active and press clutch switch that's says active does that mean if I change stalk to cruise control I can have cruise control - obviously there has to be a wire there to BCM fingers crossed if not one would have to be fitted
If it can be done and is it hard and a lot of hassle
Yes you can install CC as i have it on my Combo.
You will need to add a wire from the stalk PIN 4
to the BCM PIN 2.
Then activation via variant programming.
Gav
14 Zafira Tourer Techline FULLY LOADED
VAUXCOM UPA USB AUTODATA TOLERANCE AVAILABLE IN BRISTOL AND SOUTHWEST
Is there any chance the wire might be already there and if it's not how hard is it to get it from stalk to BCM and what sort of wire and connectors for the end do you use
When did you find a cruise control stalk for your combo - Mines a 1.3 cdti - year 2008 - or can you just get a corsa c stalk
Many thanks for your help
I know for a fact the wire will not be there.
I have a high spec Combo. AC, electric windows, heated and electric mirrors, cd70 and GID. xenon headlights
All standard from factory.
I installed CC to put the spec even higher, just awaiting on some heated leather seats and il be a happy buddy.
Its one wire that feeds behind the dash to the BCM hole behind the glovebox.
Yes a Corsa C CC stalk is correct, no other stalk will fit, as they have different patterned plugs.
Hope this helps
Gav
14 Zafira Tourer Techline FULLY LOADED
VAUXCOM UPA USB AUTODATA TOLERANCE AVAILABLE IN BRISTOL AND SOUTHWEST
What wire do I need to get and what connectors do I need for each end of the wire ?I know for a fact the wire will not be there.
I have a high spec Combo. AC, electric windows, heated and electric mirrors, cd70 and GID. xenon headlights
All standard from factory.
I installed CC to put the spec even higher, just awaiting on some heated leather seats and il be a happy buddy.
Its one wire that feeds behind the dash to the BCM hole behind the glovebox.
Yes a Corsa C CC stalk is correct, no other stalk will fit, as they have different patterned plugs.
Hope this helps
Gav
Where's the best place to get a used corsa c cruise control stalk ?
Is it easy to fit the stalk and the wire from stalk to the BCM ?
Thanks for your help
I can supply the wire and terminals needed!
As for the stalk. That's a 3 second job lol.
You are better of getting one from eBay.
14 Zafira Tourer Techline FULLY LOADED
VAUXCOM UPA USB AUTODATA TOLERANCE AVAILABLE IN BRISTOL AND SOUTHWEST
How can I be certain my van can use it using opcom , I know there is a clutch switch above clutch pedal?
I have looked and looked on eBay for cc stalk but couldn't see anything
If have read getting the wire from stalk to bcm unit is a nightmare
Once installed and activated with opcom is there a light on dashboard to show you are using cc
Sorry for all the questions - total noob
Thanks
They are rare to find.
Not really i do have a how2 for installing the loom and to program the cruise control.
As for the tell tale light sadly not compatible on any clocks
14 Zafira Tourer Techline FULLY LOADED
VAUXCOM UPA USB AUTODATA TOLERANCE AVAILABLE IN BRISTOL AND SOUTHWEST
Could you tell me where about a in opcom you look to make sure clutch switch works and 2 brake switches work as I have forgot.
Looked for a corsa c cc stalk but no luck yet
Many thanks for your help
You need to check the measuring blocks in the engine section and see if the clutch switch activates when pressed.
80% sure the clutch and brake switch are present, due to being a diesel.
As for activation iirc there are 3 places to activate it
14 Zafira Tourer Techline FULLY LOADED
VAUXCOM UPA USB AUTODATA TOLERANCE AVAILABLE IN BRISTOL AND SOUTHWEST
Diagnostics.org.uk is a trading name of RJP Projects Ltd which is a company registered in England and Wales with company number 7453778
Bookmarks