Not done a CIM on a Zaffy before..
I've seen it previously on the veccy where it automagically updates the code version though
Hi all
anyone can help, how to properly do the CIM software update (SPS programming)?
I did on body, CIM, additional functions, prepare SPS programming, (safe same date) ignition and tech2 on all time
All proces SPS from TIS, reprogramming finish 100% and after CIM did not want to answer any more.
what I did wrong?
THANKS
Not done a CIM on a Zaffy before..
I've seen it previously on the veccy where it automagically updates the code version though
Hi this I found on one of the forum.
Important: For a successful programming follow the instructions in TIS 2000 and set up the CIM for programming by Tech-2 before reprogram. Procedure for CIM SPS programming:
--> After selection of MY and Vehicle "Enter"
--> Body "Enter"
--> CIM "Enter"
--> Additional Funktions "Enter"
--> SPS programming set up "Enter" - CIM SPS programming will be performed
--> Exit
Afterwards carry out the CIM SPS programming (Old software version:
M: --.57; New software version: M: --.62).
Important: During the CIM set up ignore all "switch off ignition" messages, otherwise the programming of the CIM won´t be successful.
Note: Vehicles with PEPS are not affected and therefore it is not possible to program a CIM with PEPS.
Diagnostics.org.uk is a trading name of RJP Projects Ltd which is a company registered in England and Wales with company number 7453778
Bookmarks