UHP4 question

[manevni0]

Got your point. So I will proceed with Tech2 session and will let you know about the results. Anyhow, what about possible loose cable?

[n0tiert]

Could be a reason, did you solder the UHP connection?

[manevni0]

Nope, yesterday I didn't have soldering iron.

[n0tiert]

Nope, yesterday I didn't have soldering iron.

Solder them and use shrink tubes to cover them

[manevni0]

Hi! An update here. Today I finally soldered and used heat shrink tubes to isolate everything. In the last couple of days I was seeing phone icon to dissapear from second tab ot the screen. UHP module was unresponsive from time to time. So I was sure it is loose connection. After intervention today everything seems to be fine and I believe I found why bluetooth is disconnecting every ~20 sec.

If I want to share phone book and call lists from my phone to uhp4 module, then something happens and connection drops. My phone is LG G3. If I do not select to allow uhp4 access to phone book and call lists everything is fine. I performed couple phone calls with duration more tnan 10 sec.

But phone book and call lists sharing is working with a friend Huawei phone.

Now the only thing left is to reset CID, CD70 NAVI and uhp4 and to program it with DVD90 NAVI. I do not want to wait till next weekend for 2 hours tech2 session, but I'm affraid ic I use my Op-Com something might go wrong.

[n0tiert]

Hi! An update here. Today I finally soldered and used heat shrink tubes to isolate everything. In the last couple of days I was seeing phone icon to dissapear from second tab ot the screen. UHP module was unresponsive from time to time. So I was sure it is loose connection. After intervention today everything seems to be fine and I believe I found why bluetooth is disconnecting every ~20 sec.

If I want to share phone book and call lists from my phone to uhp4 module, then something happens and connection drops. My phone is LG G3. If I do not select to allow uhp4 access to phone book and call lists everything is fine. I performed couple phone calls with duration more tnan 10 sec.

But phone book and call lists sharing is working with a friend Huawei phone.

Now the only thing left is to reset CID, CD70 NAVI and uhp4 and to program it with DVD90 NAVI. I do not want to wait till next weekend for 2 hours tech2 session, but I'm affraid ic I use my Op-Com something might go wrong.

I Would wait for the Tech2 Session, Op-Com does weird Stuff sometimes, mostly when using non original!
With Tech2 you are Safe, also you can re sps the UHP with latest Firmware 3.50.

[manevni0]

Okay, decision taken. I will wait for Tech2 session. I have to speak with this guy for this SPS. I'm not aware with this procedure. And he didn't mentioned it as well. We discussed only reset and re-program modules.

[n0tiert]

Easy Job, connect Tech2 to car, Request UHP ECU Data , Connect Tech2 to GlobalTis -> SPS and it compares local to Server Version (if equal does not matter) and downloads Firmware to Tech2, reconnect to car, Program UHP ECU, Drink a coffee and you are set, after that reconfigure UHP with Tech2 , Op-Com has probs setting CodeIndex in UHP !

this can be done also if using not divorced UHP from donor car

[soulman]

also note that version 3.5 firmware can only be installed on the later UHPs and not the earlier ones

[manevni0]

Okay I will let him know about required procedure and this clarification.

My UHP4 module is Delphi Grundig.
No: 13187911
UWA
70.03.01
Code: ZJ
Sw Date: 27.05.2005