cd70 decoding

[crystyxcw]

Another read, saved as .bin

Thank you,

CD70 popa.zip

[Astraracer87]

Hello,
I tried to solder the EPROM from the board. But the glue is very strong. I can not get it solved. Is there a tool that can read this and possibly other EPROM on the PCB? What can you recommend me?

Regards

[liviu2004]

Put a cutter blade under the chip, heat and push up.

[Astraracer87]

I Try but i can Not Go under The Eprom with Blade good. There is Glue complite under the Eprom

[liviu2004]

Do you know how many times I've done this? Use cutter blade, it is thin enough. It will not go full, and its not intended to cut the glue, just to lift the eeprom, when tin is heated with hot air station.

[soulman]

as above, never had an issue with a blade and heat

[mariuso2o]

I have a problem. Is it possible to pair cd70 display from other car which is not divorced. And another problem is that I cant plug in my old display because its already broken ( some parts are missing)

[n0tiert]

If your old Display still contains the eeprom desolder it and solder to new or read out eeprom of new and ask for pin.

Rgds

n0tiert