My vectra wont start. Im gettin a back fire through the throttle body when i add a little easy start but nothing else. Any ideas or help on this would be really appreciated.
My vectra wont start. Im gettin a back fire through the throttle body when i add a little easy start but nothing else. Any ideas or help on this would be really appreciated.
try the coil pack matey quite a common failiure on the b gsi
failing that have you checked the timing to see if the belt is ok
there is also crank sensors that can fault on the b gsi and cut the fueling
to check it connect the car to opcom or tech 2 and look in the data logs for the engine rpm signal if this is at 0 whilst cranking the sensor is dead
Belt ok but may have jumped a tooth or to by the looks. Only compresion in one cylinder. Going to re time it and hope for the best. If not will be breaking. Irmischer import.
If its 2 teeth forget it matey iv worked on hundreds of these engines in all variants 2.5 2.6 3.2 etc and there aint much movement on the timing.
if you retime it and it missfires and throws up cam sensor fault you know its well goosed and if its only cot compression on 1 cylinder tbh it prob wont start
Diagnostics.org.uk is a trading name of RJP Projects Ltd which is a company registered in England and Wales with company number 7453778
Bookmarks