how to enable Park pilot on corsa d with tech 2

[corsaedt]

hi there
finally i got all parts for PDC before activated i want to learn how to enable on tech 2
i think i can imagine it s about BCM and IPC
but i want to be sure that s why
can you show me directions like;
1) Diagnose
2) Year
3) Model
by the way my car is 2012 corsa d
all parts is original not after market
thanks a lot..

[sarah1331]

unfortunately Richard doesn't like tutorials posting as people should know what to do with there tools


id go through the ipc bcm cim rec

[corsaedt]

hımm i see they will give me tech 2 that s why i asked..sorry

[pecky]

Module will probably be listed in the Low speed canbus network as well and will need enabling throughout.

On tech2 a useful feature is under Vehicle -> Module ECU presence check

It should detect the module and do all the low speed can for you.

I only don't like giving out guides because the opcom brigade just scrape them off sites and suddenly think they are experts because they can follow a button press list. If you think logically about what items in the car may need to receive/send data to the park pilot module, it should be easy to figure out.

A lot of times you need to think outside the box when retrofitting, so a guide may not be sufficient.

[wars1977]

Module will probably be listed in the Low speed canbus network as well and will need enabling throughout.

On tech2 a useful feature is under Vehicle -> Module ECU presence check

It should detect the module and do all the low speed can for you.

I only don't like giving out guides because the opcom brigade just scrape them off sites and suddenly think they are experts because they can follow a button press list. If you think logically about what items in the car may need to receive/send data to the park pilot module, it should be easy to figure out.

A lot of times you need to think outside the box when retrofitting, so a guide may not be sufficient.

Hello,

In my Corsa GSi 1.6T 2008 there was no pilot park factory. There is also no bundle to him. Two plugs come to the parkpilot control unit itself. one 12 pin and the other 8 pin. To 8 pin there is a bunch of sensors in the trunk. Only 3 wires come to 12 pin. Pin 1 + 12v, pin 8 GND, pin 6 LIN bus.

Of course, all LIN bus cables have been connected to the LIN bus under BCM, the power supply from the trunk light (for tests).

In tech 2 I started the ECU presence check module, on Low speed can it detected that there were changes, asked if there is parkpilot in the car. I confirmed. Unfortunately, it can not communicate with the parkpilot switchboard.

I have no idea why.

ECU presence check has programmed all modules in which it should be reported that a driver like parkpilot has appeared.

Maybe you have ideas. I will be very happy for any help.

I've included the parkpilot electric scheme

[corsaedt]

thank you i don t want make wrong things that s why i asked.. i hope it works very well

[sarah1331]

Thanks for the module presence check nice tip

[corsaedt]

Hello everybody
I am so happy it worked thanks for everyone
but i still didn t accomplish because i need to order bracket set..
by the way is there a way for warning shapes/lines you can see the picture

I have gid screen i saw a menu on EHU with tech2 about PAS i did enabled but there is a no difference between old settings.
and here is picture from my tacho, it gives warning because unplugged sensor and pas ecu


i have one more question about index code
my corsa is 2012 z13dtj i have touch and connect i saw on this forum it would be 003 but i can not see instant fuel info but when i switch it to 004 it works but when my tank is empty i am not getting any warning..
thank you.

[corsaedt]

Hello again
i have new question maybe its easy to answer
as you know i retrofitted Park pilot but when i move gearstick to reverse i can not hear warning sound of park pilot(but normally i can hear when music is off) because of music volume normally other cars(VW, citreon) cutes the sound..why it dosen t happen in corsa?

[pecky]

You need to be asking opel that question