Hello,
In my Corsa GSi 1.6T 2008 there was no pilot park factory. There is also no bundle to him. Two plugs come to the parkpilot control unit itself. one 12 pin and the other 8 pin. To 8 pin there is a bunch of sensors in the trunk. Only 3 wires come to 12 pin. Pin 1 + 12v, pin 8 GND, pin 6 LIN bus.
Of course, all LIN bus cables have been connected to the LIN bus under BCM, the power supply from the trunk light (for tests).
In tech 2 I started the ECU presence check module, on Low speed can it detected that there were changes, asked if there is parkpilot in the car. I confirmed. Unfortunately, it can not communicate with the parkpilot switchboard.
I have no idea why.
ECU presence check has programmed all modules in which it should be reported that a driver like parkpilot has appeared.
Maybe you have ideas. I will be very happy for any help.
I've included the parkpilot electric scheme
Bookmarks