PECKY;


Was looking into this today as I may retrofit the folding mirrors. i only have the 5 wires so looked into the wiring diagrams. thought these may be usefull to others.

Connector onto the mirror assembly - RH 13153132, LH 13153131


Connector onto the door switch - 13228878


Door multi plug


The loom you need to add:

Drivers door

Door connector - 24 to 7 - Window Switch
Door connector - 25 to 6 - Window Switch
Door Connector - 23 to 13 - Window Switch
Window Switch - 22 to - 5 Mirror Connector
Window Switch - 23 to - 6 Mirror Connector


Passenger door

Door connector - 24 to 6 - Window Switch
Door connector - 25 to 5 - Window Switch

You just need to check that there is a wire between the 2 door connectors. i.e. 24 -24 and 25 - 25
If not then you need to add one.



===========================================


Door connector - 24 to 7 - Window Switch
Door connector - 25 to 6 - Window Switch
Door Connector - 23 to 13 - Window Switch
Window Switch - 22 to - 5 Mirror Connector
Window Switch - 23 to - 6 Mirror Connector


Passenger door

Door connector - 24 to 6 - Window Switch
Door connector - 25 to 5 - Window Switch


So for the passenger door, you only need 2 wires, both going from the mirror down to the body harness. How does the drivers door go?

Door connector - 25 to 6 - Window Switch
Window Switch - 23 to - 6 Mirror Connector
Door Connector - 23 to 13 - Window Switch

Do you have to splice into the same wire for it to work?