Hi dom they are saying they think it's a now a REC fault ( peps module ) as they have split it and there is dark tracking on board ...
Any ideas how to get ignition ????
Hi dom they are saying they think it's a now a REC fault ( peps module ) as they have split it and there is dark tracking on board ...
Any ideas how to get ignition ????
When I fitted peps, I couldn't turn the ignition on but there is a way with tech 2 by going into the peps unit entering the security code then it would allow me to use the start button to turn it on and program the van. This is assuming that the units are ok.
Does anything work on the car, interior lights etc?
I'd go back to basics and check to see if there is power at each unit and that the earths are good.
Yeah mate car locks unlocks lights work ... Audio don't ... Interior light does if I remember rightly
Wht menus can you remember did you use to get into the peps security code mate
to get ignition remove button (needs centre console to be removed) put jumper wire from pin 5 to pin 2
if you dont want to do this test it with multimeter !!button itself!!
pin 5 to 2 (ignition) when pressed should bring up continious
pin 5 to 3 (start) there is resistor fitted so check for resistance
Dom VX have just phoned and have tried to fit a new REC but can not program as still no ignition they say they have checked button and all is ok thereto get ignition remove button (needs centre console to be removed) put jumper wire from pin 5 to pin 2
if you dont want to do this test it with multimeter !!button itself!!
pin 5 to 2 (ignition) when pressed should bring up continious
pin 5 to 3 (start) there is resistor fitted so check for resistance
I've just been out and tried this on the van with no keys any where near it,
Diagnostics>
year> 2007
Vehicle> astra
Body>
Peps> "confirm ignition on" press confirm but the button wont work yet.
Programming>
Program ecu> If it says ecu already programmed then go to.
Program Keys>
Security code> It will ask you to turn the ignition on, now try the button. Mine switched on at this point.
come out of the program keys screen if they are still programmed and you can work around the whole car.
If tech 2 cant find the peps unit, its probably u/s but check that it has power to it.
Diagnostics.org.uk is a trading name of RJP Projects Ltd which is a company registered in England and Wales with company number 7453778
Bookmarks