CDC40 and DAB unit CAN BUS communication

[Yasin]

I managed to activate the audio inputs by tricking the Delphi- Grundig CDC40 Opera as if it had a dab module. However, I have not yet reached a conclusion for Blaupunkt CDC40 Opera. If someone who has Blaupunkt CDC40 Opera and dab module and can receive dab broadcasts in his country, can add the data coming from his 562 id as soon as he connects the antenna connector to the dab module, I can share the whole project here as open source.

[thematush]

In my country, it only broadcasts DAB+ but after logging in the DAB45 module, it passes the signal until the first turn off of the radio.

I have CDC Opera40 Blaupunkt.
The question is, how can I read/view CAN communication to help?

[Yasin]

You need a can sniffer or a can monitor made with mcp2515 and arduino. But first, we can try a simpler way. Can you read the eeprom dump of the current dab45 and upload it here? If the audio inputs can be active, even for a short time, with a dump where the dab stations are registered, it may be enough for me to solve the communication.

[thematush]

I can't make it today. I'll try next week but I think this is the dump.
Check it and let me know.
It worked at the KISSSTORY station as far as I remember.

[Yasin]

I can't make it today. I'll try next week but I think this is the dump.
Check it and let me know.
It worked at the KISSSTORY station as far as I remember.

Can you send it by mail? I am not allowed to download in a way that I can't understand. mail: capacitor34@outlook.com

[thematush]

Sent to email.

[Jan98]

I managed to activate the audio inputs by tricking the Delphi- Grundig CDC40 Opera as if it had a dab module. However, I have not yet reached a conclusion for Blaupunkt CDC40 Opera. If someone who has Blaupunkt CDC40 Opera and dab module and can receive dab broadcasts in his country, can add the data coming from his 562 id as soon as he connects the antenna connector to the dab module, I can share the whole project here as open source.

Any luck yet to make both Blaupunkt and Delphi units work? Can you share the CAN messages as far as you got??