which year corsa? will check wiring
I've checked and there is a 3 pin switch on the clutch, there's also the 4 pin switch on the brake....I have purchased and installed the cruise control stalk and plugged the 2 pin switch at the steering column. I have taken it to my local vauxhall dealer and they have tried a few times to program but the cruise is not working. As far as vauxhall are concerned they have done all they can; i.e setting all that is needed to "present". I have read previous threads here and can only think this is the "famous" mising wire that people are talking about from the "BCM" to the cruise stalk. I also understand if I have to add this my self then I have to connect a wire from pin 41 on the BCM to ........ this is where i am in the dark....please can anyone shed some light on which is pin 41. ( I have googled and found an image showing pin 1 to 15...and pin 46 to 60 but not sure which way around for locating pin 41, also where does it connect to at the other end. Please can someone help as I see many others seeking these questions? Thanks to all in advance
which year corsa? will check wiring
regarding 41 it was s41 thats clutch switch wire comes from fuse box fuse 11 and goes to pin 3 on clutch switch than from pin 4 to x2 connector pin 21 than to bcm but if you had clutch swith connector and connected it to switch i would say you have missing wire from x2 pin 21 to bcm
It's a 62plate 1.3 cdti ecoflex S. On the clutch pedal it has the 3 pin switch. If i disconnect the switch the eco doesn't work, if that helps...
Also when you say i may possibly have the mising wire, where is it i should connect to (the pin21 location) is it on the steering column where the stalk is? thanks in advance
Last edited by waynele; 5th February 2013 at 08:58 PM.
check attached files one is cc wiring second x2 location
Thanks for your quick reply, a bit confused tho...i thought the bcm was behind the glove box behind the fuse box? thats where i was under the impression i had to connect a wire to pin 41.
yep bcm is behind glovebox if you have access to bcm check if you have wire in pin 55 if not looking at wiring than from clutch switch pin 4 run wire to bcm connector pin 55 thats looking at wiring
I only have 3 wires from the clutch switch not 4?
ok will try to write some guide with connector images and wiring diagrams sure not today but i think on weekend
Diagnostics.org.uk is a trading name of RJP Projects Ltd which is a company registered in England and Wales with company number 7453778
Bookmarks