OK,TBH there aren't that many people who retrofit the wire themselves. There are 2 levels of switched live in the Astra H which turn off at different times.
Ciggy one didn't work with me, nor has it with a couple of people who have contacted me.
Any black wire will do, it isn't taking a load at all it is just registering 12v at the UEC. You have to splice it as there is no where to add a pin free, if you unpick a factory loom it is spliced in loads of places.
I'll try and tap it off one of these black lives and see what the outcome is tomorrow eve, just wanted to wire in loose to the top of the plug to test.
I'll let you know how I get on !
Thanks
L
Evening,TBH there aren't that many people who retrofit the wire themselves. There are 2 levels of switched live in the Astra H which turn off at different times.
Ciggy one didn't work with me, nor has it with a couple of people who have contacted me.
Any black wire will do, it isn't taking a load at all it is just registering 12v at the UEC. You have to splice it as there is no where to add a pin free, if you unpick a factory loom it is spliced in loads of places.
Well I've been out in the Garage again today, tried all of the black wires at the X1 but still the switch is not showing Active!
When using a multi-metre to bridge the 2 wires it read 14.23-14.25 volts, same as when switch is connected up.
So now I'm really at a loss, I've confirmed the connections all the way back to the UEC. Cant understand what else it could be, I know its unlikely but would there be a fuse in the UEC?
Otherwise I'm thinking it could be the firmware on the ECU, think the freeze date is original release. gonna look for anyone else with same symptoms haven't come across any so far though
Any other ideas?
Cheers
Lou
It you are using opcom to check for the clutch switch, then forget it as it barely ever works.
Stupid question, but have you actually tried driving the car at anytime or are you just relying on diagnostic tool?
Have you verified it is fully programmed?
Richard Peck
www.diagnostics.org.uk
Availability & bookings here
Insignia 2.0 Bi-Turbo 4x4. AFL, Sport Leather Pack, Embedded Bluetooth, DAB, Navi 900, Infinity Sound, 20" Alloys, VXR Styling pack, Dual Climate, TPMS, Power fold mirrors, electric rear windows, Sight & Light Pack, Front & Rear Parking Sensors
Unfortunately that all I have at the moment, VX dealers gone bust so not another one for 30 miles and they'll rip me off, prices go up £20 over night.
Just going from posts saying they have it flickering between inative/active. (appreciate its not the best tool for the job).
Yes I've driven it since but not with the clutch switch fitted.
Not verified everything as I was relying on the clutch switch monitoring in "opcom".
Think its all programmed though.
Guess i should try this tomorrow
Thanks
Update,Unfortunately that all I have at the moment, VX dealers gone bust so not another one for 30 miles and they'll rip me off, prices go up £20 over night.
Just going from posts saying they have it flickering between inative/active. (appreciate its not the best tool for the job).
Yes I've driven it since but not with the clutch switch fitted.
Not verified everything as I was relying on the clutch switch monitoring in "opcom".
Think its all programmed though.
Guess i should try this tomorrow
Thanks
Seems It was mean being an idiot!
Went out to confirm the Programming, I remember now too! wen setting Cruise control to present under Engine it was timing out...
HAD TO TURN OFF ENGINE AND SET WITH IGNITION ON
Since doing this the clutch switch shows active/inactive correctly!!!
So its good news. Just got to try fit the switch now, have removed the ducting to get better access just having a rest for the moment as my wrists are killing.
Hopefully nearly there now thought.
Thanks for your patience
L
Yep that's done the trick!Update,
Seems It was mean being an idiot!
Went out to confirm the Programming, I remember now too! wen setting Cruise control to present under Engine it was timing out...
HAD TO TURN OFF ENGINE AND SET WITH IGNITION ON
Since doing this the clutch switch shows active/inactive correctly!!!
So its good news. Just got to try fit the switch now, have removed the ducting to get better access just having a rest for the moment as my wrists are killing.
Hopefully nearly there now thought.
Thanks for your patience
L
All sorted now thanks for you support
Lewis
Hi, i've been reading this with interest and wonder if those in the know could help..
My 2006 Astra Sxi (1.4)... i've fitted the clutch switch & stalk, connected the cable (from behind speedo), programmed with Opcom and it didn't work..
Now i 'guessed' the wire was missing to the X1 connector - but i could get the footwell panel off so with the glovebox removed I seperated some wires from the loom that goes through the bulkhead under the bonnet and found a plain Grey Wire.
I tapped this wire to the clutch switch wire but it still isn't working and opcom isn't changing the status when i press the clutch pedal.
Have i got the correct wire? The car hasn't blown up and still works fine so i'm keeping my fingers crossed.
If anyone car confirm that i have the correct wire, i'll check the other clutch switch wire to see if there's 12v there... just don't want to break anything. I like my car
Any guidance appreciated
Diagnostics.org.uk is a trading name of RJP Projects Ltd which is a company registered in England and Wales with company number 7453778
Bookmarks