GID decoding

[sarah1331]

From the post above, it seems like you're

Alternatively, you could:

• detach new GID
• set EHU mid-speed canbus to only EHU (no display, DAB, etc.)
• program EHU to 1802
• reattach new GID

Personally, after pairing new equipment for my car I like to reset then recode them to the code shown on my security car pass.

Not always I used to have dumps all with the same code and tried this method but it still throws errors


Sent from my iPhone using Tapatalk Pro

[dohmniq]

The difference beetwen devices in the measuring blocks the new GID display shows "security wait time" --"running".
The old display and EHU says this "not running". I don't know what does it mean.

"Security wait time -- running" means you haven't waited enough time between unlock/deactivate/reactivate/etc. attempts before you're allowed to have another go.
(i.e. the lockout timer is still running)

The wait times are something like this:
After attempt 1 - wait 10 secs.
After attempt 2 - wait 10 secs.
After attempt 3 - wait 10 mins.
After attempt 4 - wait 20 mins.
After attempt 5 - wait 40 mins.
After attempt 6 - wait 80 mins. (1 hr 20 mins)
After attempt 7 - wait 160 mins. (2 hrs 40 mins)
After attempt 8 - wait 320 mins. (5 hrs 20 mins)
After attempt 9 - wait 640 mins. (10 hrs 40 mins)
After attempt 10 - dump unit in landfill

Also, as far as I know, you need to have the car, but not engine, turned on continuously for the timer to run. Turning the car off also restarts the timer.

If you have 6 attempts remaining then you've used 4 so you'd need to wait 20 minutes.

Not always I used to have dumps all with the same code and tried this method but it still throws errors

Hmm that's interesting to know, thanks, Sarah

[sarah1331]

Wait times are
00:00:10,
00:10:00,
00:20:00,
00:40:00
01:20:00,
02:40:00,
05:20:00,
10:40:00
21:20:00
Copy paste not guaranteed
After try 10 you need to edit eeprom to recover device


Sent from my iPhone using Tapatalk Pro

[David Lora]

So it means, I have to wait 40 minutes with ignition on and no running engines before I try?

[sarah1331]

Yep


Sent from my iPhone using Tapatalk Pro

[sarah1331]

Or edit your eeprom


Sent from my iPhone using Tapatalk Pro

[David Lora]

which part of eeprom should I edit?

[sarah1331]

Post the dump


Sent from my iPhone using Tapatalk Pro

[David Lora]

I posted above #468
Thanks

[David Lora]

Thanks sarah1331 ,
just leave that, not to much waiting time