Search:

So my 2011 1.3 cdti meriva b hasn't even got the DDS function,

i've looked and looked on GlobalTis 32b for the schematic of where the DDS switch connects to, but i cant seem to find it, except a...

Getting ready to fit a factory towbar to my meriva B, i've had to source the plugs and crimp terminals myself as no loom was with it, and i've had to modify a plug for the main power socket,

it...

Could i please ask what spec the meriva this bin is from? i messed up the eeprom in my meriva uplevel display, and need to program a new eeprom.. mines a diesel 1.3, 2011, IPC code ABJ9

i kn ow i could do something simple like monitor the central locking unlock line, and when its activated twice within a second it connects the boot release switch line to earth.... b ut, this being a...

I know that mileage, vin and security code are stored in the ipc's eeprom, but what else is?

is what DIC it has stored in the eeprom? and if the car it was from left or right hand drive.... as i...

I don't suppose anyone has a dump off an IPC from a 2011 or so, meriva B?

i stupidly decided not to wait for the hot air rework station to come in the post (got lost in the snow it seems, so...

I'm finally back home, took my meriva B IPC's appart (original low level and the up level one i bot from europe)

the eeproms on them have the following on them 'L080 1505W'

i've got one of...

I'll be opening my IPC up soon to do the eeprom dump and change to get it to work on my car, and i thought whilst i have it in bits, i could change the orange smd led's to some nice blue ones,

Is...

Looking into what i'd need to retro fit AFL to my 2011 meriva B, this will be a project for the future,

but i'm wondering, do the meriva's with AFL's have the headlight washers?

i can't find...

Does anyone know the eeprom used in the meriva B ipc's?

it may be the same as the astra ipc, but i believe the insignia ipc's use a different eeprom,

i want to get a spare eeprom when i buy...

Thankyou very much,

as you can tell, i'm very new to this kind of thing, wiring i have no problem with, but my only experiance with programming is arduino boards, tho i am about to get an...

there's no REC in meriva b's i believe (just a simple fuse board)

is this any use?
2198

oops,
IPS = IPC

A quick look at an op-com fault code readout says i have the following:

ECM
EBCM
VES
EPB
SAS
BCM
HVAC
SDM

i've got hold of tech2win32b, covers my car nicely,

i dont think it has a CIM module, but i could be wrong.

The boot release is controled by a relay in the BCM, but i am figuring the meriva...

I want to make the uplevel IPC i have work on my car (meriva B) i've got an ipc from a european 1.3 diesel meriva B, so everything will be present (rear seatbelt warnings, flex/suicide door warnings...

Anyone know if VCI codes are needed for a 2011 (S10) meriva B?

Want to fit things like TPMS, trailer module, navi system, rain sense wipers / auto headlights, front fogs and so on.

Sorry, bad habit of mine (bi-polar.. got loads of projects on the go at once atm)

would the info i'm after in the canbus signals be on the GMlan.. pin 1 obdii socket?


The 9 volts gets...

I want to have a play about and see if i can get the security codes for things i plan to buy to upgrade my car (meriva B, 2011), buying the parts from scrapyards so they will not be divorced or owt. ...

I want to operate the electric boot catch remotely... with a view to having the boot pop open after fitting uprated struts.

i believe the meriva B dosent have much canbus things on it, but anyone...

Think i found them on RS, 'Molex H-DAC 64' connectors, ordered 5 of the 10 way ones (minimum order, but under 4 quid for them) hope the mirror connector is 10 way and not 8 way.

Ordered the pins...

Anyone know of a place i can buy the connector housings and pins for vauxhalls... i've read that some terminals are 'micro power timer terminals' i think they are the ones used in the fuse boards,...

Sorry for clogging the site up..

I've got some things sorted... on another forum someone got me the stalk to IPC pins i needed to connect, done that and got the DIC pages working with the...

Cheers,
main things i wanted a specific meriva IPC for was the lights in the gauges... DPF regen and that... that's not present in the insignia IPC i've got now... but found out i dont need them...

I'm currently in Chester, and live in Scarborough, Pecky is within driving distance, but he dosent seem to be taking booking for work atm.

I've figured i need to find the IPC connector pinout,...