Search:

Hello all,

I found a pair AFL headlights, but I got some information that in Astra H Bi-Xenon is present only on AHL lights.

Do you know if AFL headlights are also Bi-Xenon?

Cheers,
Nikolay

Here you are:

Hazard switch - pin 8 to IPC - pin 41
Hazard switch - pin 17 to IPC - pin 11

Hello AresUltio,

Did you add two additional wires between IPC and Hazard switch?

I found the following in DTC Checker page:
U2149 - CAN-Bus No Communication with TPMS

However in my case it is saying "Invalid signal from TPMS".

I have read this article as well. This is...

Hello all,

I have retrofitted TPMS control module and missing wiring on my Astra mk5:

TPMS Pin 1 - Green - Low Speed Can - X1 Pin 50
TPMS Pin 3 - Black - Ignition Live - X1 Pin 12
TPMS Pin 4...

Hello,

Can you please advice what is this square metal part with connector on it on the top left corner to the picture, you have uploaded?

I have retrofitted DVD90 Navi, CID, UHP4 to my car,...

Hello,

Issue is finally solved and mystery why I couldn't deactivate ESP with Sport button is revealed.
It was not related with IPC does not support Sport function.

It was due to not correct...

Hello,
Maybe I found the reason why I cannot deactivate ESP.

IPC module which supports ESP - ident NC / 13216660

Indeed IPC with NC ident supports ESP, however as per table with IPC modules...

Well, actually I'm using this option to my Astra H in the winter, when it is snowing. I position wipers in this position in the evening. It is much easier to clean all the snow from the windscreen,...

Hello,

Do you know if Insignia has Wiper Service Position/Mode, as for example is present in Astra H, Zafira B etc.?

Here is a link, showing this mode:
...

Hello,

In case you cannot find aftermarket loom for UHP4 module, you can do it yourself. I did it already and I can confirm that it is working fine.

Connect the wires as follows:

Pins 13 and...

Hello,

I double checked connection between Hazard switch and clocks (IPC module):

IPC Hazard switch
PIN 11 17
PIN 41 8

Using Vaux-COM I'm seeing that when pressing/pressing and...

Hello all,

Project for retrofitting ESP is complete. What I have done so far:

- installed new IPC module which supports ESP - ident NC / 13216660
- new hazard switch unit with SPORT button -...

I have checked and the only way to program new VIN in REC is in Immobiliser programming section. Would VIN change requst new programming of Immobiliser? Would car start with different VIN in REC...

Well, this is very interesting. My car is manufactured in June 2004 so it is with earlier VIN. Will try to find later one. And you suggest to change VIN only in REC? And not in some other module?...

Sorry I made a typo in my previous post. I meant that this option is factory removed from REC variant configuration list for European cars. And mine is with European VIN already.

So I will need...

Hello,

You will need Vaux-Com updated to the latest version so that it will support cars untill 2014 year.

Here is where to enable aditional options on the screen.

Diagnostics > Year/Model >...

Hello,

I found what is the issue with Emergency brake light function not available in REC.

This option is factory locked for cars, manufactured for European market.

It is not possible to be...

Hello all,

Since I got my car 3 years ago I've been trying to enable Emergency brake light function in the REC.

Unfortunately option is shown as "Not available" in REC variant configuration.
...

So I have programmed high speed can-bus on the ABS pump, however I'm not sure what else should I program. How to change YAW rate sensor to be compatible with AS ABS pump? From where can I reach YAW...

Hello n0tiert,

I have installed ABS pump with ident AS as a part of my ESP retrofit project.

In the table shown I'm seeing it is supporting function HBA - Hydraulic Brake Assistant.

Do you...

Yes, new clocks are successfully installed and programmed since more than an year already. Respectively I have cruise control lamp and Sport button active.
Very important to mention that...

Here is an update here. Issue with steering wheel control is resolved using OEM metal bracket.

https://drive.google.com/file/d/0B7uLd4RtBE6HakcxeXdQTktYd1U/view?usp=drivesdk

I put it on the...

Hello,
I did the same last year.
You can connect new dash (IPC) and test all lamps with Vaux-Com/Op-Com. You can test Sport button as well.
Simply you cannot start the engine.
When putting old...

Well it was quite in-depth description of way CIM module operates. In this case I will try standard work-around, instead of replacement with fixing inside contacts. I believe there was some metal...