Hi,
no preinstalled wires at all, my Astra Z14XEP 2006 Estate was naked, upper Image from XE2 shows all you need.
UEC #X2
Pin #38 is 12v+ Ignition
Pin #54 is CanBus Signal to Rainsensor
...
Type: Posts; User: n0tiert
Hi,
no preinstalled wires at all, my Astra Z14XEP 2006 Estate was naked, upper Image from XE2 shows all you need.
UEC #X2
Pin #38 is 12v+ Ignition
Pin #54 is CanBus Signal to Rainsensor
...
I've done it myself. I checked wiring diagram and build my own wire.
That are my project Images, there is no 4pin Molex in Cars ;)
Of course you need to change the front window.
2473
2474
2470
Rainsensor > Regensensor
Elektochromatischer Spiegel > Mirror
2471
4PIN Molex:
XC23 Connector Display
A157 TPMS Connector TPMS
EZ as this
Astra H
A157 TPMS ECU
A157 #1 LSCAN-High Green > XC23 #25 Green
A157 #3 Ingnition Black > X1 #44 > REC XR4 #7 FR17 5A
A157 #4 Brown Ground
2469
Please Attach eeprom dump
Is this a genuine Tech2 ?
Does it has a Date Stamp on PCMCIA Slot Cover ?
Rgds,
n0tiert
A good view here for non retrofit connerctors (up full/ lower half)
http://img.techpowerup.org/170326/20170326-114638-768x1365.jpg
Hi,
You might also have to Check both door Connectors.
Some cannot be retrofitted due missing holes for extra cables.
I've done that on my Astra H and had to replace both square door...
If your old Display still contains the eeprom desolder it and solder to new or read out eeprom of new and ask for pin.
Rgds
n0tiert
Why not go for an keyless go/openstart CIM
Seen few Sets in Ebay and retrofit cables and antenna
You should have taken it from donor car where you have the ABS from.
Not all Sensors/ABS are compatible with each other.
ABS needs to be Programmed in the Variant config and VIN.
And you have...
Did you reprogrammed it to your car Specs and did you also changed the yaw rate Sensor compatible to the AS? Else it might not work.
HBA depends in car Speed and Brake pressure, i dunno how to...
Hello Alexander,
Welcome to the Forum, Enjoy your Stay.
there you go ;)
Hope it fits your needs
http://img.techpowerup.org/170906/cim-wire-diagram.jpg
Might Check the connector Plug if aux wire fits properly.
Did you changed some on the Setup during the Working day?
Depends on your needs, CID Type BN has 3 Line BC display out of the box, Type KS has only 2 Line and needs Upgrade if you want it.
Works best with CD70 / CD90, i dont see any need with aftermarket...
So what Type is it, drop ne a Note.
Thx
Only supports ESP and TSA :(
What type of ABS you got ?
some doesn´t have the feature
2126
(Source: astra-h-forum.de)
check here, i´ve retrofitted mine few weeks ago
ABS Type: BR / YAW RATE Sensor: BA
check the ABS you need to add DDS there, also check if wire from Hazard to IPC is present
Hazard Switch -> IPC
Black-Brown #4 -> Black-Brown #39
2125
atleast you need an programmer, SOIC8 Clip to dump the eeprom Information, software to read eeproms usually comes with programmer,
i´m in Zandvoort 1 week from tomorrow on so if you are nearby........
Hi,
you could try to Factory Reset the GID and the CD30MP3, Program it with the code from the previous Car (UHP), then Factory Reset all (GID, Radio, UHP) and reprogram with new code
else you...
Hi M8,
Currently have a GX Installed
2123
2124
Rgds,
Need One to get rain- lightsensor enabled, currently i retrofitted Everything but i cant enable it in UEC. Engine Type Z14XEP
Diagnostics.org.uk is a trading name of RJP Projects Ltd which is a company registered in England and Wales with company number 7453778