Im sure its ok, but a new version would be better and more advanced for what you need
GAv
Type: Posts; User: Gav
Im sure its ok, but a new version would be better and more advanced for what you need
GAv
~What year is the CID ???
What year is your car ?
What opcom do have ? Version?
Set the opcom to 2008 year and try again
Set the index code to 009 in the display settings
In variant settings also select board info display
Gav
As far as im aware, they are tech2 SPS to fully reset it, you can use opcom if you wish to program it to the stereo and display.
You need 009 index code, im assume your car is a zaf cdti according to your avatar?
Gav
No, If you you're making a bench loom you'll need stereo and display with uhp4 settings enabled, ecu and lots of wiring, also an obd plug and 12v going to it
Gav
Ahhh ok I see the issue, so check control is on in 2 places
Display and UEC
Go into the UEC and turn the check control off on the UEC variant programming settings, keep the one on for the...
Yes leds bulbs? If they are not canbus error free ones they will bring up errors
Do you have any leds fitted?
Gav
That looks like a eeprom from a Corsa D IPC
It’s the same eeprom as m35080
Gav
You only need 2 for the Mic pin 3 and 12
The roof plug where the mic connects to
pin 3 is yellow factory which is +
pin 12 is black factory which is -
Hope this helps
You can buy a second hand GID, and just swap the PCB board over inside, the marks are on the glass, so an easy swap will do
Gav
Whats the ident written on the clocks, teh two letters.
I can check on my compatible list
Gav
Hi mate, if the clocks are programmed, go into the variant programming and tell the clocks you have front fog and rear wiper
Program, and it should be sorted
You use the same plug as the non sport switch
You can fit the sport button your self, they come as a hazard switch unit, providing you have the correct clocks they will work.
Gav
If you have the car pass for the new stereo and display, then you can program the uhp4 to it no issues.
You will need a reset/cleared bluetooth module, custom loom and mic.
Its simple to...
Its back
Gav
As soulman said, it looks corrupt
Gav
Looks like is reset.
Sent from my iPhone using Tapatalk
Swap the front facia over
Gav
Sent from my iPhone using Tapatalk
If you have both stereo and display, they will just work straight away. No programming needed
Gav
REPORT GENERATED BY PECKY'S VAUXHALL DECODER
File Name: cid bn.bin
Unit: Siemens VDO - GID / CID
EEPROM: 93C66 EEPROM
Vehicle:
Security Code:9534
Link not working
Gav
Diagnostics.org.uk is a trading name of RJP Projects Ltd which is a company registered in England and Wales with company number 7453778