This is a Vectra/Signum CID? The eeprom is on the other side of the board. 93C66 if I remember correctly
Type: Posts; User: KicOPC
This is a Vectra/Signum CID? The eeprom is on the other side of the board. 93C66 if I remember correctly
VCIs are unique for each VIM as I remember
Tech 2 cannot programm modules if there is a discrepancy in the VIN numbers.
Try to reset the new CIM module first (with the code the delaer used) and programm it with the correct VIN and Security...
It is not the case just about sensors being present. There are various thresholds configured in ECU monitoring health of sensors and the engine and for example removing primary O2 sensors does not...
I know its a bit late but first check the security wait time on the CIM to see if it is running.
If it is running leave the ignition on for the indicated time.
Next, disconnect the battery for a...
http://www.codecard.eu/images/uploads/me7_6_2%20CAN%20mod1.jpg
MCU is locked/encrypted (Mask set 3L40K).
You need Carprog or similar (Orange, XPROG):
http://www.codecard.eu/files/Manuals/MCU/CARPROG%20Motorola%20HC12%20programmer%20manual.pdf
To be honest...
EERPOM/Flash is in the MC9S12DG128
Maybe an aftermarket kit?
Never seen front sensors on Astra H, only rear
Damn annoying bots :D
Are you reading them "in circuit"?
Best practice is to desolder them from the board.
MCUs and crystals can interfere with the readout
Yes, I had the same issue.
No software update as far as I am aware exists to fix this.
Top up your oil slightly above center or ignore it.
Thank you for the info @soulman
I have a keen customer and he wil probobly swap the cluster for a OPC (VXR) one.
If i get my hands on the cluster i will share the eeprom from both so we can try...
Hi!
is it possible to change this type of IPC style:
2351
...to this style, using Online SPS before i waste 50€?
2352
SPS should work with any J2534 compatible interface.
The cheapest I could find is Tactrix OpenPort 2.0:
...
Sorry, I am talking about Astra :D
There are 4 screws holding it.
Two are behind the Headlight switch, and two behind steering column
Well, CAN bus command turns the lights on but I cannot see you reverse engineer the Micronas MCU code to turn on a different set of LEDs when sport button is pressed.
Forget about it, easier way...
Yes, you can set the clock with OP-COM, no SC required
There are a few German damos nad. ols files floating around the internet for ME1.5.5 (Z20LET).
Just Google it, you will find them.
Depends on your budget but i presume you are not willing to spend 4000€ for a genuine tuning tool.
Clones are a risk so have a failover plan (ability to recover from a failed flash with Tech2 or a...
No diagnostic tool can help you with this.
You need chip tuning tools.
You go about this as you would remaping.
Code indexes are listed here: https://www.diagnostics.org.uk/help/forumdisplay.php/49-Vectra-C-Code-Index
OP-COM Diagnostics: Infotainment system ->DIS -> Programming -> Program Code Index
YOu are correct, road speed by RPM calibration table is in the ECU Flash/Map.
You need a tuner who has access to a DAMOS file for your ECU so he can re-calibrate the maps.
Difficult to find...
Diagnostics.org.uk is a trading name of RJP Projects Ltd which is a company registered in England and Wales with company number 7453778