Printable View
hi there
finally i got all parts for PDC before activated i want to learn how to enable on tech 2
i think i can imagine it s about BCM and IPC
but i want to be sure that s why
can you show me directions like;
1) Diagnose
2) Year
3) Model
by the way my car is 2012 corsa d
all parts is original not after market
thanks a lot..
unfortunately Richard doesn't like tutorials posting as people should know what to do with there tools
id go through the ipc bcm cim rec
hımm i see they will give me tech 2 that s why i asked..sorry
Module will probably be listed in the Low speed canbus network as well and will need enabling throughout.
On tech2 a useful feature is under Vehicle -> Module ECU presence check
It should detect the module and do all the low speed can for you.
I only don't like giving out guides because the opcom brigade just scrape them off sites and suddenly think they are experts because they can follow a button press list. If you think logically about what items in the car may need to receive/send data to the park pilot module, it should be easy to figure out.
A lot of times you need to think outside the box when retrofitting, so a guide may not be sufficient.
thank you :) i don t want make wrong things that s why i asked.. i hope it works very well
Thanks for the module presence check nice tip
Hello everybody
I am so happy it worked :) thanks for everyone
but i still didn t accomplish because i need to order bracket set..
by the way is there a way for warning shapes/lines you can see the picture
Attachment 1165
I have gid screen i saw a menu on EHU with tech2 about PAS i did enabled but there is a no difference between old settings.
and here is picture from my tacho, it gives warning because unplugged sensor and pas ecu
Attachment 1166
i have one more question about index code
my corsa is 2012 z13dtj i have touch and connect i saw on this forum it would be 003 but i can not see instant fuel info but when i switch it to 004 it works but when my tank is empty i am not getting any warning..
thank you.
Hello again
i have new question maybe its easy to answer
as you know i retrofitted Park pilot but when i move gearstick to reverse i can not hear warning sound of park pilot(but normally i can hear when music is off) because of music volume normally other cars(VW, citreon) cutes the sound..why it dosen t happen in corsa?
You need to be asking opel that question
Connect it to amp would say 4k W and fit largest piezo buzzer in world
Vag group cars and opel are not comparable
If you look in vag group you will find this and I didn't found where to stick opel in
Vw & audi - overpriced
Seat & skoda - same engine, electrics & and most of them share chassis but much cheaper