Pecky's Vauxhall Decoder

Results 1 to 2 of 2
  1. #1
    Member Gadgetman's Avatar
    Join Date
    Oct 2019
    Location
    birmingham
    Posts
    1
    Vehicle
    Zaf B 2006 1.8 design / zaf a 2003 1.8 dualfuel elegance

    Exclamation Advice and help Please - cim module

    Hi all

    I wonder if anyone can help or advise.
    I have a zafira b 2006 1.8 design panoramic roof all recalls done exept the latest heater plug one.
    I also have a tech 2 - opcom 1.39 and 1.41 - and a carprog with all 31 or 32 leads. and have done electronics for 30 or so years.
    so here it is.
    coming up to mot time - horn doesn't work and steering wheel buttons flakey so here's what I did
    checked the uec for water damage non visible, checked the cim for magic clip all good but still no buttons and horn
    so I removed cim and replaced front half for a known good one recalibrated the sas with my tech 2 and everything fine but still no horn and buttons
    a few weeks passed before I had another go.

    no issues on the car exept horn and flakey buttons on the steering wheel.
    next I removed the cim again and removed front to back connecter and hard wired and heat-shrank for tidiness all six pins. this didn't work and I forgot to re-calibrate the sas as time was getting on.
    now because the mot was due in 2 weeks, mechanical work was needed for mot so I ordered a new cim from lookers Vauxhall and gave the car to a garage for the suspension work, pre mot check etc.
    I now have the car back all mechanically fine and cannot calibrate the sas ????

    now I have done this before with my tech 2 and everything was fine a few weeks ago but for some reason now the cim will not accept the pass code and keeps saying wrong code - yet this has worked before.
    now my real problem is the ipc and ecu accept the code fine ( so im not going mad and forgetting the code) but the cim does not want to play ball
    I don't have the original car pass so don't know the mechanical key number for the car - so I cant program the new cim in.

    my mot is up in about 10 days and I fear Vauxhall will not be quick enough to get me a new car pass printed as local dealers have to apply for them from head office and I do not rush my programming.
    I can find almost all the settings I need for the new cim except the mechanical key number.
    is there another way to find the mechanical key number so I can program the new cim in - or do I just wait for a Vauxhall car pass to be printed.
    apologies if this is a long post - but im feeling a little frustrated.
    thanks for reading
    Gadgetman


    • Advertising

      advertising
      Diagnostics.org.uk
      has no influence
      on advertisments
      that are displayed by
      Google Adsense

    • #2
      Member KicOPC's Avatar
      Join Date
      Sep 2018
      Location
      Croatia
      Posts
      33
      Vehicle
      Opel Astra H OPC
      I know its a bit late but first check the security wait time on the CIM to see if it is running.
      If it is running leave the ignition on for the indicated time.
      Next, disconnect the battery for a few minutes, check that the timer is not ON and then try to input the security code again.

      Had similar issue on Astra not accepting security code. After battery reconnect it worked OK.

      Regarding the horn and buttons, re-solder the headers on the CIM PCB.

Similar Threads

  1. Astra H CIM decode hellp either to read or PCB swap
    By Richard Kerman in forum Decoding
    Replies: 5
    Last Post: 14th October 2019, 12:52 PM
  2. Astra H Cim Read Flash Type
    By Donwoody1981 in forum Astra
    Replies: 5
    Last Post: 12th August 2019, 07:43 AM
  3. CIM Astra H - decoding
    By Grzegorz__1976 in forum Decoding
    Replies: 4
    Last Post: 18th March 2019, 10:53 PM
  4. HID advice
    By RyanWWFC in forum Exterior
    Replies: 6
    Last Post: 17th June 2013, 11:44 PM
  5. advice please
    By Taylor in forum Mechanical
    Replies: 8
    Last Post: 18th April 2012, 05:59 PM

Visitors found this page by searching for:

Nobody landed on this page from a search engine, yet!
SEO Blog

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
This site was created by Pecky to act as a knowledge base of useful information regarding Vauxhall cars.
Whilst I can help out with works, this isn't my full time job, so occasionally there may be a delay in replying.

Other forums

AOC, AON, VXR-Online, Insignia-drivers.uk

Diagnostics.org.uk is a trading name of RJP Projects Ltd which is a company registered in England and Wales with company number 7453778