Results 1 to 6 of 6
  1. #1
    Member nathinspace's Avatar
    Join Date
    Aug 2018
    Location
    manchester
    Posts
    5
    Vehicle
    astra mk5 1.7 ecoflex

    Heated seat retro fit

    hoping you can help me Iv had a look at guide on here and I have rec and terminals for relay and fuses but don't have under seat and switch wiring . If I understand right there are three pins on the chair connector block for the heated seat using pins 7,8 and 9

    7=switch signal wire
    8=12v ign feed
    9=ground/ earth

    Firstly I need to know if the grey handled connector on the REC that is missing the two pins , are these two wires the 12v ign feed for each chair or where do they terminate also where does pin 9 need earthing to chassis or back through switch ?

    Secondly if signal wires are missing from switch to x1 connector can they be wired directly to pin 7 or do they go to x1 connector then to pin 7 or is there some missing in between . I could probably manage with a decent wire diagram but can't find any online or names/ codes of the different types of pins I would need to order to install the seats correctly. I have scan tool to enable on can bus also. Please any help is appreciated or if you sell a kit with The stuff I need I'll happily buy it any advice would be brilliant as I want to do it right but need to know where wires terminate thankyou


    • Advertising

      advertising
      Diagnostics.org.uk
      has no influence
      on advertisments
      that are displayed by
      Google Adsense

    • #2
      Member nathinspace's Avatar
      Join Date
      Aug 2018
      Location
      manchester
      Posts
      5
      Vehicle
      astra mk5 1.7 ecoflex
      23 VIEWS and no reply cmon lads I need some help, anyone got autodata

    • #3
      VIP+ kadett90's Avatar
      Join Date
      May 2014
      Location
      Finland
      Posts
      9
      Vehicle
      Opel Astra H
      Quote Originally Posted by nathinspace View Post

      Firstly I need to know if the grey handled connector on the REC that is missing the two pins
      Yes


      Quote Originally Posted by nathinspace View Post
      are these two wires the 12v ign feed for each chair
      Yes...from fuse FR39 and FR40



      Quote Originally Posted by nathinspace View Post
      where does pin 9 need earthing to chassis or back through switch ?
      To central tunnel


      Quote Originally Posted by nathinspace View Post
      Secondly if signal wires are missing from switch to x1 connector can they be wired directly to pin 7 or do they go to x1 connector then to pin 7 or is there some missing in between
      You can connect it directly to pin 7.

    • #4
      Member nathinspace's Avatar
      Join Date
      Aug 2018
      Location
      manchester
      Posts
      5
      Vehicle
      astra mk5 1.7 ecoflex
      Kadett90...........you sir ......are a legend .can you enlighten me on what the central tunnel is please , thankyou for getting back to me

    • #5
      Member nathinspace's Avatar
      Join Date
      Aug 2018
      Location
      manchester
      Posts
      5
      Vehicle
      astra mk5 1.7 ecoflex
      do you mean earth it to chassis under centre console next to chairs

    • #6
      VIP+ kadett90's Avatar
      Join Date
      May 2014
      Location
      Finland
      Posts
      9
      Vehicle
      Opel Astra H
      Do you know where the diagnostic socket is....front of the hand brake handle.
      The eath point is in there.
      But you can earth it somewhere else...no matter.

Similar Threads

  1. Heated seat retrofit?
    By LeeMutz in forum Electrical
    Replies: 13
    Last Post: 16th June 2014, 10:29 AM

Visitors found this page by searching for:

Nobody landed on this page from a search engine, yet!
SEO Blog

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
This site was created by Pecky to act as a knowledge base of useful information regarding Vauxhall cars.
Whilst I can help out with works, this isn't my full time job, so occasionally there may be a delay in replying.

Other forums

AOC, AON, VXR-Online, Insignia-drivers.uk

Diagnostics.org.uk is a trading name of RJP Projects Ltd which is a company registered in England and Wales with company number 7453778