Pecky's Vauxhall Decoder

Page 1 of 3 123 LastLast
Results 1 to 10 of 21
  1. #1
    VIP+ soulman's Avatar
    Join Date
    Apr 2011
    Location
    Essex
    Posts
    1,223
    Vehicle
    Vectra

    Insignia engine ECM

    Hi all,

    Got a bit of a problem.. Insignia 10 plate. 160 cdti version.... edu18?? dead ecu, know its dead as remapper unfortunately looked at wrong pinout for it...

    We're going to source another ecu but need to know if its coded with a pin code like the edu16's or wether it needs the VCI code wiping and how we're going to pair it to the car its going in?

    cheers for any advice.

    Dean


    doh, thread title should be ecu/ecm


    • Advertising

      advertising
      Diagnostics.org.uk
      has no influence
      on advertisments
      that are displayed by
      Google Adsense

    • #2
      Site Owner pecky's Avatar
      Join Date
      May 2010
      Location
      Wolverhampton, United Kingdom
      Posts
      7,417
      Vehicle
      Insignia 2.0 Biturbo 4x4
      Never had to look at swapping an ECM, not sure if they are security coded or vin locked or both?

      All I can find on TIS is


      Prepare control unit for removal (new SPS-function):
      - This function is only required before removing an ECU from a
      vehicle.
      - Not all control units need to be prepared before removal.
      - In TIS2Web, select "SPS" application and select "reprogram ECU".
      After entering vehicle data and VIN, select the prepare control
      unit for removal and follow the screen prompts.

      Programming:
      - Most new control units require programming. This function is also
      used for reprogramming.
      - In TIS2Web, select "SPS" application and select "reprogram ECU".
      After entering vehicle data and VIN, select the appropriate
      programming function and follow the screen prompts.

      Configuration and Setup (New SPS-function):
      - Some control units require a configuration and setup after
      programming.
      - In TIS2Web, select "SPS" application and select "reprogram ECU".
      After entering vehicle data and VIN, select the appropriate
      configuration and setup function and follow the screen prompts.

      Immobilizer Learn (New SPS-function):
      - The BCM and the ECM require an immobilizer learn after the
      "configuration and setup" -function.
      - In TIS2Web, select "SPS" application and select "reprogram ECU".
      After entering vehicle data and VIN, select the "immobilizer learn
      function" and follow the screen prompts.
      Richard Peck
      www.diagnostics.org.uk

      Availability & bookings here

      Insignia 2.0 Bi-Turbo 4x4. AFL, Sport Leather Pack, Embedded Bluetooth, DAB, Navi 900, Infinity Sound, 20" Alloys, VXR Styling pack, Dual Climate, TPMS, Power fold mirrors, electric rear windows, Sight & Light Pack, Front & Rear Parking Sensors

    • #3
      VIP+ soulman's Avatar
      Join Date
      Apr 2011
      Location
      Essex
      Posts
      1,223
      Vehicle
      Vectra
      many thanks for that. going to be buying an mdi and learning it a bit prematurely for my liking so steep learning curve on the new gen. of cars..

    • #4
      VIP domtorredo's Avatar
      Join Date
      Jan 2012
      Location
      Hull, East Yorkshire
      Posts
      1,591
      Vehicle
      Peugeot Expert
      If doing other makes than forget mdi get j2534 device sae aproved and do nearly all makes
      When i got mdi was thinking its good investement but when volvo bmw or anything else rolls in especially ford than you will find out what i mean
      Mdi 1.5k ford vci 1.5k but you can spend 1.5k on cardaq or snapon pro3 and do them all with one device

    • #5
      VIP+ soulman's Avatar
      Join Date
      Apr 2011
      Location
      Essex
      Posts
      1,223
      Vehicle
      Vectra
      only work on vauxhall, dont do other makes... so mdi is ideal...

    • #6
      VIP domtorredo's Avatar
      Join Date
      Jan 2012
      Location
      Hull, East Yorkshire
      Posts
      1,591
      Vehicle
      Peugeot Expert
      Than yes mdi
      Have you found already where to buy or need info where to look for

    • #7
      VIP domtorredo's Avatar
      Join Date
      Jan 2012
      Location
      Hull, East Yorkshire
      Posts
      1,591
      Vehicle
      Peugeot Expert
      Before you buy anything gm mdi is discountinued now and is replaced with gm mdi 2 wifi and non wifi versions should be available in uk around may and around 600 if bosch registered

    • #8
      VIP domtorredo's Avatar
      Join Date
      Jan 2012
      Location
      Hull, East Yorkshire
      Posts
      1,591
      Vehicle
      Peugeot Expert
      And latest info says mdi 2 will be bacwards compatible
      But current mdi will work with cars up to 2017

    • #9
      VIP+ soulman's Avatar
      Join Date
      Apr 2011
      Location
      Essex
      Posts
      1,223
      Vehicle
      Vectra
      good to know thanks Dom

    • #10
      VIP+ soulman's Avatar
      Join Date
      Apr 2011
      Location
      Essex
      Posts
      1,223
      Vehicle
      Vectra
      bought china clone to get me (or my mate more like!) out of trouble but will wait till mdi2 is out and then buy genuine

Page 1 of 3 123 LastLast

Similar Threads

  1. new 2.0cdti engine
    By lucas_1691 in forum Insignia
    Replies: 4
    Last Post: 15th September 2014, 08:59 PM
  2. 1.3 cdti engine
    By Low3n in forum Astra
    Replies: 2
    Last Post: 3rd March 2014, 02:09 AM
  3. Engine Problem
    By Stevie in forum Mechanical
    Replies: 10
    Last Post: 1st November 2013, 11:47 AM
  4. Engine shaking
    By paul2000 in forum Astra
    Replies: 4
    Last Post: 25th October 2013, 12:07 AM

Visitors found this page by searching for:

insignia sps programming

SEO Blog

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
This site was created by Pecky to act as a knowledge base of useful information regarding Vauxhall cars.
Whilst I can help out with works, this isn't my full time job, so occasionally there may be a delay in replying.

Other forums

AOC, AON, VXR-Online, Insignia-drivers.uk

Diagnostics.org.uk is a trading name of RJP Projects Ltd which is a company registered in England and Wales with company number 7453778